|
|
Post by garbulky on Oct 29, 2014 20:11:06 GMT -5
I removed the top rear screws but it doesn't appear to be coming off. I want to try out the jumper.
|
|
bootman
Emo VIPs 
Typing useless posts on internet forums....
Posts: 9,358
|
Post by bootman on Oct 29, 2014 21:44:51 GMT -5
Jumper? Please don't jump.  |
|
|
|
Post by garbulky on Oct 29, 2014 22:56:44 GMT -5
Headphone jumper. I still haven't been able to figure it out.
|
|
|
|
Post by garbulky on Nov 2, 2014 11:15:01 GMT -5
Bump
@keithl
|
|
usagi
Seeker Of Truth
Posts: 3 
|
Post by usagi on Nov 2, 2014 20:32:00 GMT -5
I recently checked the jumpers in the DC-1 and I was surprised to find that the bass boost was off, opposite with what the default setup is supposed to be. Well anyways to open lid you also need to unscrew 6 screws on the left and right side top of case too. It might actually be just 4 screws, but they were there anyways. Check the manual if you need more help.
|
|
|
|
Post by garbulky on Nov 2, 2014 22:25:20 GMT -5
I recently checked the jumpers in the DC-1 and I was surprised to find that the bass boost was off, opposite with what the default setup is supposed to be. Well anyways to open lid you also need to unscrew 6 screws on the left and right side top of case too. It might actually be just 4 screws, but they were there anyways. Check the manual if you need more help. Okay so the left and right side of the case? I don't see any on the top of the case. But I see what appears to be circular/allen wrench screws on the left and right side. Is that what you are talking about? I was hesitant because I didn't know if it was securing the inside circuits! |
|
|
|
Post by Axis on Nov 3, 2014 4:41:30 GMT -5
garbulky the instructions are on page 14 of the manual. emotiva.com/resources/manuals/stealth_DC-1_manual.pdfRemove the six screws securing the top cover, then remove the cover. (The cover hooks under the front panel on the front edge, so lift it up from the back edge and tilt it forward to remove it.) Sometimes on stuff like this you have to lift the back of the panel up before you pull it away from the front to disengage the lock taps on the front. Sometimes you have to pull pretty hard too. Hope this helps. Oh and the diagram in the manual shows you which screws to pull. |
|
|
|
Post by garbulky on Nov 3, 2014 11:18:02 GMT -5
garbulky the instructions are on page 14 of the manual. emotiva.com/resources/manuals/stealth_DC-1_manual.pdfRemove the six screws securing the top cover, then remove the cover. (The cover hooks under the front panel on the front edge, so lift it up from the back edge and tilt it forward to remove it.) Sometimes on stuff like this you have to lift the back of the panel up before you pull it away from the front to disengage the lock taps on the front. Sometimes you have to pull pretty hard too. Hope this helps. Oh and the diagram in the manual shows you which screws to pull. Thank you!! I was trying to find the DC-1 manual but wasn't able to find it on the product page. |
|
usagi
Seeker Of Truth
Posts: 3
|
Post by usagi on Nov 3, 2014 11:45:13 GMT -5
Also if your DC-1 is like mine, the screws on the sides require a hex shaped screwdriver while the back screws use the standard + shape. It doesn't make sense to make the sides use hex screws not as many people have them.
|
|
