Have Emotiva give up on Firmware updates ?

[jonas79]

Asked Keith in treads and even Lonnie with No answer back.

MC700 im reffering to.

Will Pcm to Other formats with HDMI, speaker Pops/Noice get a fix ?

Hdcp drop outs from units connected with HDMI.

Work on EmoQ calibration ?

Manual setup are alot more correct today and alot with Umc-200 have reacted on EmoQ on this unit.

[adaboy]

What product are you referring to the MC 700?

[jonas79]

Feb 23, 2019 12:45:24 GMT -5 adaboy said:

What product are you referring to the MC 700?

Yes ofc im in MC700 Thread 😀

[jonas79]

Seen this unit with cirrus chip, same remote and 4K on same Hdmi inputs, XLR & RCA inputs.

This unit have got Dolby Vision support with a firmware update.

www.iotaenterprises.co.uk/products/iotavx-7-1-4k-hdr-home-theatre-av-processor

Have MC700 got Dolby Vision support yet ?

[garbulky]

Oh hey look at the boards on the MC-700

And the
Iotavx 7.1




I notice some similarities

[rob80b]

Believe you've just let the cat out of the bag.... : )
.....Good timing.... just logged on looking for a replacement for my UMC-1 and the IOTAVX 7.1 looked like a candidate for a low profile AVP so the 700 might be it.

[nrde]

So anyone tried installing the IOTAVX FW?

Would be nice to get stuff that Emotiva has opted out to provide to its customers.

[agv]

I bought a new MC-700 and there was firmware 3.1.3. After that I went to the Emotivа website and downloaded the latest firmware there. As it turned out later, it was version 2.9.3. Where can I get 3.1.3 now?

[markc]

Feb 23, 2019 16:40:12 GMT -5 rob80b said:

Believe you've just let the cat out of the bag.... : )
.....Good timing.... just logged on looking for a replacement for my UMC-1 and the IOTAVX 7.1 looked like a candidate for a low profile AVP so the 700 might be it.

You want a low profile AVP?

It seems that the money buys an awful lot of FRESH AIR with this PCB design in the IOTAVX/MC700!

They could have made it a whole lot lower profile!

[garbulky]

Sept 12, 2020 17:22:43 GMT -5 agv said:

I bought a new MC-700 and there was firmware 3.1.3. After that I went to the Emotivа website and downloaded the latest firmware there. As it turned out later, it was version 2.9.3. Where can I get 3.1.3 now?

Contact emotiva.

[agv]

Sept 13, 2020 6:38:49 GMT -5 garbulky said:

Sept 12, 2020 17:22:43 GMT -5 agv said:

I bought a new MC-700 and there was firmware 3.1.3. After that I went to the Emotivа website and downloaded the latest firmware there. As it turned out later, it was version 2.9.3. Where can I get 3.1.3 now?

Contact emotiva.

Why not to upload the latest firmware (3.1.3) for free access?
Or it does not apply to all MС-700? But only to the last revision?

[leefdalucky]

So is this one (3.1.3) available on the product page?
I d/ld the file but it's showing up as a 2018 file.

I wonder what's new. I'd love to get rid of the popping noise on my apple TV.

[garbulky]

Sept 13, 2020 11:07:16 GMT -5 agv said:

Sept 13, 2020 6:38:49 GMT -5 garbulky said:

Contact emotiva.

Why not to upload the latest firmware (3.1.3) for free access?
Or it does not apply to all MС-700? But only to the last revision?

I don’t know. I think contacting Emotiva is your best bet using their phone number. This lounge rarely has Emotiva staff on here just fans. Good luck

[fronkle]

Sep 14, 2020 at 5:48pm
like
Post Options
Post by KeithL on Sep 14, 2020 at 5:48pm
LATEST RELEASE MC-700 FIRMWARE - as of 9/14/2020 - v3.1.3


This link will get you the latest FULL VERSION of the MC-700 firmware as of 9/14/2020:
You will need to put the firmware file on a USB stick formatted FAT32.
Power your MC-700 OFF, then power it ON with the stick inserted in the update port, and the update should occur automatically.
(The update only takes a few seconds.)

MC-700 v3.1.3 Firmware:

www.dropbox.com/sh/5olnsj56lcrwlqj/AADJos2nJqAZaxXNDvG23nmSa?dl=0

Last Edit: Sep 14, 2020 at 5:52pm by KeithL

[Deleted]

Does anyone knows what 3.1.3 version is fixing?
I cannot find any information

Regards, Jack