|
|
Post by emofrmcgy on Feb 24, 2019 12:02:10 GMT -5
Anyone in emoland know the output capabilities of the headphone amp built into the Dc-1 ?
I’m thinking about consolidating my pt-100 and schiit asgard down to a dc-1. Thoughts from anyone who’s heard both ?
|
|
|
|
Post by creimes on Feb 24, 2019 14:41:44 GMT -5
Power wise it wasn't the best from what I found, the Asgard has more power.
|
|
|
|
Post by emofrmcgy on Feb 24, 2019 14:44:38 GMT -5
Power wise it wasn't the best from what I found, the Asgard has more power. Can you work your time machine wizardry and pull up the old product page for the dc-1 ? |
|
novisnick
EmoPhile
CEO Secret Monoblock Society
Posts: 27,223 
|
Post by novisnick on Feb 24, 2019 14:50:09 GMT -5
Power wise it wasn't the best from what I found, the Asgard has more power. Can you work your time machine wizardry and pull up the old product page for the dc-1 ? I can try and email it to you if he doesn’t post a link. Just let me know. 😁🎶🎶🎶🎶 |
|
|
|
Post by creimes on Feb 24, 2019 16:21:07 GMT -5
|
|
|
|
Post by creimes on Feb 24, 2019 16:24:39 GMT -5
Look at those prices   |
|
|
|
Post by emofrmcgy on Feb 24, 2019 16:50:44 GMT -5
Thanks fellas.
|
|
KeithL
Administrator 
Posts: 9,938
|
Post by KeithL on Feb 25, 2019 15:00:30 GMT -5
Anyone in emoland know the output capabilities of the headphone amp built into the Dc-1 ? I’m thinking about consolidating my pt-100 and schiit asgard down to a dc-1. Thoughts from anyone who’s heard both ? DC-1 Headphone amp
Frequency response jumpers set to FLAT.
Frequency Response: 20 Hz - 20 kHz +/- 0.14 dB
THD: < 0.025% (at 1 V output; at 1 kHz)
S/N: > 101 dB (ref 1 V output; A weighted)
Power output:
750 mW into 8 ohms
1200 mW into 32 ohms
180 mW into 300 ohms
90 mW into 620 ohms
|
|
|
|
Post by creimes on Feb 25, 2019 22:14:44 GMT -5
Anyone in emoland know the output capabilities of the headphone amp built into the Dc-1 ? I’m thinking about consolidating my pt-100 and schiit asgard down to a dc-1. Thoughts from anyone who’s heard both ? DC-1 Headphone amp
Frequency response jumpers set to FLAT.
Frequency Response: 20 Hz - 20 kHz +/- 0.14 dB
THD: < 0.025% (at 1 V output; at 1 kHz)
S/N: > 101 dB (ref 1 V output; A weighted)
Power output:
750 mW into 8 ohms
1200 mW into 32 ohms
180 mW into 300 ohms
90 mW into 620 ohms
Jumpers ? didn't know there were any. |
|
|
|
Post by emofrmcgy on Feb 25, 2019 22:34:26 GMT -5
DC-1 Headphone amp
Frequency response jumpers set to FLAT.
Frequency Response: 20 Hz - 20 kHz +/- 0.14 dB
THD: < 0.025% (at 1 V output; at 1 kHz)
S/N: > 101 dB (ref 1 V output; A weighted)
Power output:
750 mW into 8 ohms
1200 mW into 32 ohms
180 mW into 300 ohms
90 mW into 620 ohms
Jumpers ? didn't know there were any. Yes. There’s two small jumpers that can be set to give a 2db bump at 20hz. Or so I understand what is in the manual. Page 13 and 14 in the manual. |
|
|
|
Post by emofrmcgy on Feb 25, 2019 22:36:21 GMT -5
Anyone in emoland know the output capabilities of the headphone amp built into the Dc-1 ? I’m thinking about consolidating my pt-100 and schiit asgard down to a dc-1. Thoughts from anyone who’s heard both ? DC-1 Headphone amp
Frequency response jumpers set to FLAT.
Frequency Response: 20 Hz - 20 kHz +/- 0.14 dB
THD: < 0.025% (at 1 V output; at 1 kHz)
S/N: > 101 dB (ref 1 V output; A weighted)
Power output:
750 mW into 8 ohms
1200 mW into 32 ohms
180 mW into 300 ohms
90 mW into 620 ohms
Thank you Keith. Is the power output different when the jumpers are set to have the low end boost ? |
|
|
|
Post by creimes on Feb 25, 2019 22:50:54 GMT -5
Jumpers ? didn't know there were any. Yes. There’s two small jumpers that can be set to give a 2db bump at 20hz. Or so I understand what is in the manual. Page 13 and 14 in the manual. I've owned two and never even noticed that lol. |
|
