Post by ntrain42 on Dec 17, 2009 16:46:37 GMT -5
Dann, Lonnie etc:
How about some stats or questions answered on these subs.
A. RMS power(.1% max)? CLass D? A/B? other?
B. Internal volume? Sealed? Ported?
C. Front firing or downward firing(preferred) driver?
D. Variable xover? Frequency Slope?(Hopefully 12/24db switcheable)
E. Variable phase control?
F. BYPASS/LFE input(bypasses all interal amp xover/eq functions)?
G. Adjustable subsonic filter?
H. Manual PEQ(including frequency,level and Q)?
I. Pass through or master/slave function(to daisy chain subs)?
Pictures? Lets get some MEAT to this thread!
Lets see if this will help a little.
A. 1000 RMS, Class D
B. 1.58^ft sealed
c. Front Firing
D. Xover Freq 20-200 in 1 hz increments.
Slope: 6db, 12db, 24db, 36db, 48db (selectable)
Filter type: Bessel, Butterworth, Linkwitz-Riley (selectable)
E. 0-180 degrees in 1 degree increments.
f. No bypass needed. Just set all the EQs, xover etc to 0.
G. No, the subsonic is auto-adaptive so no user controls.
It is completely transparent.
H. Yes, 7 PEQ bands with 5 individual memories.
Frequency adjuments from 20 to 200.
Gain adjustments from +6db to -15db.
Adjustable Q from 0.05 to 3.0 octaves
Some other things to note.
1. Adjustable gain for each of the 5 memories.
2. User selectable power on modes
3. User selectable power off modes.
4. Assignable trigger modes.
5. Auto Room Correction
6. GUI control via USB
7. Display control and brightness settings and more.
;D
