|
Post by ron526 on Nov 5, 2013 9:10:27 GMT -5
Hi,
Have been playing with REW and Holmimpulse for RC. Tried to use "EMQ Calibrate" but couldn't select it. Display just blinked, wouldn't stay highlighted. I can change all the other EMQ settings but can not do the calibrate function. Have turned unit off, did complete shutdown-same results. I do not want to reload firmware/software. Any suggestions?
Thanx, Ron526
|
|
|
Post by drtrey3 on Nov 5, 2013 9:45:56 GMT -5
I had the same problem. You will not be so stupid as I, but I had the mic plugged into the headphone jack.
True story.
Trey
|
|
selkec
Emo VIPs
SCREW YOU GUYS, IM GOING HOME!!!
Posts: 3,779
|
Post by selkec on Nov 5, 2013 10:32:57 GMT -5
Why even run it
|
|
|
Post by ron526 on Nov 5, 2013 12:20:22 GMT -5
Was in the right place. I run it to get a starting reference point and mainly because I have it. It doesn't hurt to see what the system "thinks". And I have 3 other buckets to play with. Just looking for some help to resolve this issue.
Thanx
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 6, 2013 2:06:33 GMT -5
I had the same problem. You will not be so stupid as I, but I had the mic plugged into the headphone jack. True story. Trey Oh no! LMAO!
|
|
|
Post by drtrey3 on Nov 6, 2013 9:55:09 GMT -5
As to why run it, in my room, it works quite well and I prefer it to direct. The bass is better integrated than I can get it on my own, the speaker balance is better too. At least when I put the mic in the right hole. 8)
Trey
|
|
|
Post by ron526 on Nov 11, 2013 18:03:36 GMT -5
I respectfully would like to delete this post and then deny that I did anything silly or stupid. I will not admit to having done anything wrong.
Something went to the right instead of the left.
|
|
bootman
Emo VIPs
Typing useless posts on internet forums....
Posts: 9,358
|
Post by bootman on Nov 11, 2013 20:38:35 GMT -5
I have much respect to those that man up and admit their "Doh!" moments. It is how we all learn. God knows I have made my fair share.
|
|
|
Post by ron526 on Nov 11, 2013 21:46:15 GMT -5
No comment.
|
|