|
|
Post by audiosyndrome on Mar 27, 2015 23:28:56 GMT -5
Version 3.0 did NOT fix my HDMI pass through problem. Audio still goes very low to high back and forth back and forth to complete loss of audio and then back. Very frustrating. TV is a Vizio.
Russ
|
|
|
|
Post by sonicseeker on Mar 28, 2015 0:11:04 GMT -5
Just did the update and when I turn off the XMC-1 with TV on and video pass through, the XMC menu screen flashes on the TV screen 7 or 8 times quickly after the xmc is in stand-by mode and than goes away.
Any body else?
|
|
|
|
Post by sonicseeker on Mar 28, 2015 8:15:15 GMT -5
Update. I recommend turning off video pass through before doing update so processor can shut completely down at end of update. I did this and re-ran the update and the menu flashing on the screen seems to be fixed.
|
|
|
|
Post by sonicseeker on Mar 28, 2015 9:15:53 GMT -5
Update. I recommend turning off video pass through before doing update so processor can shut completely down at end of update. I did this and re-ran the update and the menu flashing on the screen seems to be fixed. Spoke too soon it is still doing it. So no problems before firmware update to fix problems now have problem, Yay........... |
|
cawgijoe
Emo VIPs 
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,035
|
Post by cawgijoe on Mar 28, 2015 9:19:48 GMT -5
Update. I recommend turning off video pass through before doing update so processor can shut completely down at end of update. I did this and re-ran the update and the menu flashing on the screen seems to be fixed. Spoke too soon it is still doing it. So no problems before firmware update to fix problems now have problem, Yay........... Does the flashing only occur with video pass thru on? |
|
|
|
Post by sonicseeker on Mar 28, 2015 9:22:21 GMT -5
Spoke too soon it is still doing it. So no problems before firmware update to fix problems now have problem, Yay........... Does the flashing only occur with video pass thru on? Yes |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,035
|
Post by cawgijoe on Mar 28, 2015 9:32:21 GMT -5
As is the case with firmware updates in general, problems are fixed and then new ones are created. Emotiva does a good job of perusing these forums, but I would suggest calling them on Monday and reporting any issues that you can't resolve.
See if you can talk to tech support.
If you do, please report back.
|
|
|
|
Post by frenchyfranky on Mar 28, 2015 10:29:30 GMT -5
|
|
|
|
Post by ludi on Mar 28, 2015 10:37:53 GMT -5
I just did the update, it is a matter of minutes and it was done without any issue.
|
|
|
|
Post by sonicseeker on Mar 28, 2015 10:40:58 GMT -5
|
|
Chris
Emo VIPs
Posts: 424
|
Post by Chris on Mar 28, 2015 10:53:45 GMT -5
Firmware update was an easy and flawless process. Bravo Emotiva! You've nailed it. I went through the very early UMC-1 updates so this streamlined USB based update is most welcome. Thanks.
-CB
|
|
|
|
Post by rswood on Mar 28, 2015 11:10:19 GMT -5
Just did the update and when I turn off the XMC-1 with TV on and video pass through, the XMC menu screen flashes on the TV screen 7 or 8 times quickly after the xmc is in stand-by mode and than goes away. Any body else? I have this problem also, I also get flashing of the volume level bar when I change the volume up. Did not have this issue before! It flashes off and on for several seconds when I up the volume. |
|
|
|
Post by sonicseeker on Mar 28, 2015 11:16:57 GMT -5
Just did the update and when I turn off the XMC-1 with TV on and video pass through, the XMC menu screen flashes on the TV screen 7 or 8 times quickly after the xmc is in stand-by mode and than goes away. Any body else? I have this problem also, I also get flashing of the volume level bar when I change the volume up. Did not have this issue before! It flashes off and on for several seconds when I up the volume. Yup have seen that also once or twice. |
|
|
|
Post by audiosyndrome on Mar 28, 2015 12:46:05 GMT -5
Just noticed the volume bar flashing a few times with BDP as a source.
Russ
|
|
|
|
Post by khollister on Mar 28, 2015 13:32:16 GMT -5
Just noticed the volume bar flashing a few times with BDP as a source. Russ same here as well - new bug, never saw this before |
|
|
|
Post by Dark Ranger on Mar 28, 2015 14:00:31 GMT -5
 Ah, software updates. Ya gotta love it.  |
|
|
|
Post by geebo on Mar 28, 2015 14:05:57 GMT -5
Just noticed the volume bar flashing a few times with BDP as a source. Russ same here as well - new bug, never saw this before No flashing with my BDP-103. |
|
|
|
Post by audiosyndrome on Mar 28, 2015 14:23:15 GMT -5
Blinked once or twice when I switched to that input. And that was it.
Russ
|
|
|
|
Post by 405x5 on Mar 28, 2015 15:15:14 GMT -5
THAT'S THE LAST STRAW!!!! I'M REVERTING TO FIRWARE 1.3!!!!!!
naahhhh.......just kiddin!
|
|
KeithL
Administrator 
Posts: 10,273
|
Post by KeithL on Mar 28, 2015 15:57:21 GMT -5
There was a specific issue with no audio in Video in Standby with some Sony Bravia sets. We traced that to some sort of audio frame identifier that we apparently weren't doing 100% perfectly, but nobody except certain Sony Bravia sets seemed to care. It has been entirely FIXED. Whatever is going on with your Sammy, it's something different....  Clipping Gone! Video Pass Through volume issue still so low it's unusable on my Samsung. Release notes mentioned this issue on Sony only although I called it in as a bug. |
|
