|
|
Post by AudioHTIT on Oct 2, 2015 4:45:14 GMT -5
I wouldn't be surprised if 3.1 is needed for everything to work. Keith has already responded to a thread of mine about the XMC-1 not properly handling various parts of the network control protocol. He said it would be fixed in a future firmware relase. -tm No wonder the app has taken so long to get started on. Big sigh....yet another firmware update in the future to wait for? I hope he means 3.1 and I hope it's going to really be this week. I know 3.1 will fix some IR issues and think it will fix associated IP problems, hopefully today will be the day. On the App Store it list iOS 7 as the minimum for this App. |
|
|
|
Post by wilburthegoose on Oct 2, 2015 6:38:42 GMT -5
iOS7? Wasn't that 2 years ago?!
|
|
|
|
Post by AudioHTIT on Oct 2, 2015 9:33:31 GMT -5
iOS7? Wasn't that 2 years ago?! If you look at the App's on your iPhone or iPad, you'll see that iOS 7 is a common minimum. Some older devices work better on the older iOS, and developers don't want to limit their audience by requiring the latest version. However the better Apps now take advantage of the features in iOS 9, yet still maintain compatibility with iOS 7. |
|
|
|
Post by wizardofoz on Oct 2, 2015 11:36:21 GMT -5
I'm referring to the min firmware on the xmc-1
|
|
|
|
Post by AudioHTIT on Oct 2, 2015 16:05:18 GMT -5
I'm referring to the min firmware on the xmc-1 Sorry, I misread your post. I think we can assume that 3.1 will be required for a fully functional IR and IP command set. |
|
|
|
Post by novisnick on Oct 2, 2015 21:30:35 GMT -5
I tried tapping on the blank empty spot to the right at the top and was able to change inputs, but didnt know which i would get. Just adding to the info base.   Same in portrait mode, blank spot below tuner changes inputs when touching different spots.  |
|
|
|
Post by socketman on Oct 2, 2015 21:57:36 GMT -5
This is a question for those who have an ipad. Is it possible to have multiple apps open at once side by side on the desktop at the same time. I have multiple apps for my equipment and would like to have access to them at the same time, is this possible.
|
|
|
|
Post by melm on Oct 3, 2015 0:13:44 GMT -5
This is a question for those who have an ipad. Is it possible to have multiple apps open at once side by side on the desktop at the same time. I have multiple apps for my equipment and would like to have access to them at the same time, is this possible. They could be if the apps were written to support split screen mode. So far there are a handful of apps that do this but more are coming. As of now when I use the Emotiva remote app I can split screen with mail, messages and some news apps and safari. And you can have two apps open. Not more. Mel |
|
|
|
Post by wizardofoz on Oct 3, 2015 3:22:33 GMT -5
I would love to comment as my iPad will support split apps but the XMC-1 APP crashes as soon as I hit the power button  |
|
|
|
Post by AudioHTIT on Oct 3, 2015 4:03:55 GMT -5
This is a question for those who have an ipad. Is it possible to have multiple apps open at once side by side on the desktop at the same time. I have multiple apps for my equipment and would like to have access to them at the same time, is this possible. As melm said there aren't a lot of split screen apps yet, I count about two dozen on my iPad. None of my 'Eqipment' apps are split screen yet, meaning they can share the screen with a split screen app, but they can't be 'the splitter'. Here's the XMC-1 App with this thread in Safari splitting the screen.  |
|
morfious
Minor Hero
Putting the XMC-1 through its paces
Posts: 75 
|
Post by morfious on Oct 3, 2015 8:11:08 GMT -5
I also have the orange power button even though XMC-1 is on:
Video Standby On, Same Network bridged to second router (hard wired), iPhone 6s / iOS 9.0.2
|
|
|
|
Post by melm on Oct 3, 2015 9:24:11 GMT -5
This behavior has been much discussed. It appears to have been fixed in firmware 3.1.
Mel
|
|
|
|
Post by wilburthegoose on Oct 3, 2015 10:03:34 GMT -5
FWIW, I still prefer the original Emotiva remote. #2 is the PC app, but that's currently not working |
|
ratmice
Emo VIPs 
I'm not an actor, but I play one on TV.
Posts: 1,853
|
Post by ratmice on Oct 3, 2015 10:26:23 GMT -5
I just installed both the iPad and iPhone apps. It seems that Zone 2 is not really working for me - it's *really* laggy and the volume doesn't adjust. Well, it does if I hold the slider all the way up/down *and* also contrive to hit the arrow at the same time.
p.s. this seems be the same problem that RSavage noted on the second page of the discussion. I will add that the zone 2 functions are working fine on my Harmony Ultimate.
p.p.s. I also have the 'orange' power button issue on both iPhone 5S (latest FW) and a iPad mini retina (latest FW).
|
|
|
|
Post by Chuck Elliot on Oct 3, 2015 10:31:52 GMT -5
FWIW, I still prefer the original Emotiva remote. #2 is the PC app, but that's currently not working What's not working in the PC App? Is this with firmware 3.1? |
|
|
|
Post by wilburthegoose on Oct 3, 2015 14:58:39 GMT -5
Nope - 3.0 (I'm not one of the chosen ones).
It worked perfectly until I used the iOS app, and now it throws a parsing error when I try to connect.
I'm going to try a power cycle on the XMC-1 and the PC to see if it resolves things.
I LOVE, LOVE, LOVE your program, Chuck!
|
|
|
|
Post by Chuck Elliot on Oct 3, 2015 16:11:00 GMT -5
Nope - 3.0 (I'm not one of the chosen ones). It worked perfectly until I used the iOS app, and now it throws a parsing error when I try to connect. I'm going to try a power cycle on the XMC-1 and the PC to see if it resolves things. I LOVE, LOVE, LOVE your program, Chuck! I don't believe that the iOS App is correctly closing the UDP ports on closing. I'll load the iPad version tonight and see! |
|
|
|
Post by wilburthegoose on Oct 3, 2015 18:24:21 GMT -5
Chuck - here's the pop-up:
Communications Error
Can't correctly parse response from XMC-1
Parser Error: 115
Followed by another popup:
Communications Error
Error Parsing Transponder Ping packet!
|
|
|
|
Post by Chuck Elliot on Oct 3, 2015 18:29:56 GMT -5
Chuck - here's the pop-up: Communications Error Can't correctly parse response from XMC-1 Parser Error: 115 Followed by another popup: Communications Error Error Parsing Transponder Ping packet! what name have you given your XMC-1? |
|
|
|
Post by AudioHTIT on Oct 3, 2015 18:35:31 GMT -5
what name have you given your XMC-1? I call mine 'Dan' in honor of ... well, you know.  |
|
