|
|
Post by jarrod2750 on Jul 25, 2016 10:54:40 GMT -5
Hi I am a DC-1 newbie. For the XLR outputs, are those exclusive to the analog inputs? So here's my question, if the incoming signal is USB or Coaxial, will the XLR outputs not a/d it and pass it on?
Thanks,
|
|
|
|
Post by macromicroman on Jul 25, 2016 10:57:50 GMT -5
I might be wrong but since the DC-1 is a digital to analog converter it will take the incoming USB or Coaxial signal and convert it to analog and then output it through the XLR or RCA analog outputs. An analog incoming signal will also be output to the outputs.
|
|
|
|
Post by wizardofoz on Jul 25, 2016 11:01:16 GMT -5
anything you select on any of the inputs will appear on both of the analogue outputs (RCA and XLR)
|
|
|
|
Post by monkumonku on Jul 25, 2016 11:11:36 GMT -5
Hi I am a DC-1 newbie. For the XLR outputs, are those exclusive to the analog inputs? So here's my question, if the incoming signal is USB or Coaxial, will the XLR outputs not a/d it and pass it on? Thanks, The XLR outputs pass whatever signal you have selected for the input. If it is a digital signal, then the DC-1 converts it to analog and sends it to both the RCA and XLR outputs. The XLR's cannot carry a digital signal. |
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,849
|
Post by LCSeminole on Jul 25, 2016 11:45:37 GMT -5
Just to add to what everyone else said, the RCA and XLR output are both active as well.
|
|
|
|
Post by garbulky on Jul 25, 2016 11:57:38 GMT -5
There is no A/D going on. Also if the analog RCA unbalanced is converted to a balanced signal and output via the balanced XLR outputs.
|
|
|
|
Post by jarrod2750 on Jul 27, 2016 6:01:00 GMT -5
Thank you for clearing up and confirming for me.
|
|
