|
|
Post by bolle on Feb 27, 2020 1:38:22 GMT -5
KeithL Do you still plan to fix the "display flicker" issue? It wasn´t there before the V3-board and is annoying... I just the XMC-1 exclusively dimmed to 0%. When I press "Info" I just want the display to appear shortly and not flicker and shift the coordinates where stuff is displayed slightly once during that period. This wasn´t the case with the older boards and is very distracting when it happens in your peripheral vision. I even sent your support videos showing that issue etc. but never got any clear response... I don´t want anything fancy, I just want this to behave as before with the older boards, which shouldn´t be hard to do. Still would like to get an update on this. Is the fix for this issue included in 5.15? |
|
|
|
Post by donh50 on Feb 27, 2020 14:52:08 GMT -5
I have not had a chance to install it yet, probably this weekend; has anyone? Any issues?
|
|
|
|
Post by bolle on Feb 29, 2020 5:35:53 GMT -5
Still would like to get an update on this. Is the fix for this issue included in 5.15? Is the issue I mentioned fixed in 5.15? Thank you! |
|
|
|
Post by stephen on Feb 29, 2020 9:41:19 GMT -5
I installed 5.15 on my XMC-1 w/ v3 HDMI this morning -- appears to fix Dolby Vision/HDR screen blinking issues with FIRESTICK 4k input!
|
|
|
|
Post by krauley on Feb 29, 2020 21:11:07 GMT -5
Updated to 5.15 yesterday and everything is working great, in fact i dont see a difference but i know its on 5.15 from the info display. So come on in the 5.15 waters are fine!  |
|
|
|
Post by cyyyr05 on Feb 29, 2020 21:28:39 GMT -5
During 2 days and the firmware update 5.15 for the XMC1v3, I found that my center speaker had lost in naturalness and depth in the timbre of the voices with a highlight of a sharp and slightly unpleasant sound.
It is the same for my listening to CDs in full analog (stereo reference)
I just reinstalled the 5.14 firmware and everything is perfect I found the sound from my speakers
Have you noticed this problem?
|
|
|
|
Post by stephen on Mar 1, 2020 6:23:32 GMT -5
cyyr05 -- I have not noticed any audio quality issues. One thing that has cropped up as I attempted to re-run DIRAC and may or may not be related: I can't get a network connection from the XMC-1 to my switch. I've tried an XMC-1 cold power down/up, different CAT5e cable, network switch, etc., but the XMC-1 Ethernet port just seems dead.
|
|
|
|
Post by megash0n on Mar 1, 2020 10:21:06 GMT -5
cyyr05 -- I have not noticed any audio quality issues. One thing that has cropped up as I attempted to re-run DIRAC and may or may not be related: I can't get a network connection from the XMC-1 to my switch. I've tried an XMC-1 cold power down/up, different CAT5e cable, network switch, etc., but the XMC-1 Ethernet port just seems dead. Try this and see what happens. I have to do it often on my RMC. Turn off unit, flip the switch or unplug for at least 15 secs. Plug in or flip the switch back on allowing it to do whatever it does to do its initial startup. Give that 15 secs and then push the power button. Once I lose my network link light, I have to do this for it to come back. May be similar on the XMC. |
|
|
|
Post by stephen on Mar 1, 2020 16:33:47 GMT -5
cyyr05 -- I have not noticed any audio quality issues. One thing that has cropped up as I attempted to re-run DIRAC and may or may not be related: I can't get a network connection from the XMC-1 to my switch. I've tried an XMC-1 cold power down/up, different CAT5e cable, network switch, etc., but the XMC-1 Ethernet port just seems dead. Try this and see what happens. I have to do it often on my RMC. Turn off unit, flip the switch or unplug for at least 15 secs. Plug in or flip the switch back on allowing it to do whatever it does to do its initial startup. Give that 15 secs and then push the power button. Once I lose my network link light, I have to do this for it to come back. May be similar on the XMC. Just tried that, no luck, next step reinstall old version of firmware and reset defaults? I must say though otherwise this new firmware is awesome on the XMC-1, Mrs. has not complained once this weekend about switching inputs and having missing video or things blinking when viewing HDR content. |
|
|
|
Post by sgracing on Mar 7, 2020 8:29:15 GMT -5
During 2 days and the firmware update 5.15 for the XMC1v3, I found that my center speaker had lost in naturalness and depth in the timbre of the voices with a highlight of a sharp and slightly unpleasant sound. It is the same for my listening to CDs in full analog (stereo reference) I just reinstalled the 5.14 firmware and everything is perfect I found the sound from my speakers Have you noticed this problem? |
|
|
|
Post by sgracing on Mar 7, 2020 8:44:40 GMT -5
Just installed 5.15.
With my Sony XBR Z9D and no sound , The tv would say connected to audio system ARC/CEC but cannot transmit sound. I followed all the steps as usual . Tried several times !
It appears that the update is incompatible with the Sony.
Went back to 5.14 and all is well.
Tried calling emotiva yesterday but everyone was busy, left a message.
It appears that Sony is a very difficult system to write code for.
Cheers
|
|
|
|
Post by mdavidh on Mar 20, 2020 17:40:37 GMT -5
Same no sound issue for me with 5.15. I have been trying to rectify a loud pop through my fronts (xpa-2) and subsequent protect mode. I was hoping firmware might fix this but I had to roll back.
On a hunch I turned off the triggers to the amps and no more popping or protection. I have not yet tried troubleshooting the trigger cable but this was a new symptom on my system that has not changed in for years besides the hdmi board.
|
|
|
|
Post by spom409 on Mar 21, 2020 15:25:58 GMT -5
Performed the 5.15 upgrade a few weeks ago. I’ve noticed an increase in issues with the inputs. For Apple TV, I have to switch to another input and then back to get any audio or video. The XMC-1 also locked up twice today. I’ll try another run through the upgrade. If that doesn’t help, I’ll go back to 5.14 which was pretty stable.
|
|
|
|
Post by unclegit on Mar 25, 2020 18:03:20 GMT -5
Do we know if there is another batch of boards being manufactured for the XMC-1 and what the expected availability date would be ?
|
|
|
|
Post by Gary Cook on Mar 25, 2020 18:33:12 GMT -5
Do we know if there is another batch of boards being manufactured for the XMC-1 and what the expected availability date would be ? Call Emotiva. Cheers Gary |
|
|
|
Post by cyyyr05 on Mar 30, 2020 5:46:30 GMT -5
Hi After trying to install the 5.15 firmware on my XMC1v3 with USB ...... I had a shift freeze for 2 hours so I had to shut down electrically I specify that my USB key was well formatted in fat32 When I switched on again obviously I got this error message "HDSB82" Now i can't do anything everything is blocked Do you have a solution ? thank you so much  |
|
stiehl11
Emo VIPs 
Give me available light!
Posts: 7,269
|
Post by stiehl11 on Mar 30, 2020 7:01:24 GMT -5
Do we know if there is another batch of boards being manufactured for the XMC-1 and what the expected availability date would be ? My understanding was that they were no longer offering the v3 board for XMC-1. But, as Gary Cook mentioned, it would be best to call Emotiva. |
|
|
|
Post by bolle on Mar 30, 2020 8:30:09 GMT -5
I am still on 5.8 due to the reports here regarding the issues with 5.8. I only have occasionally sound but no picture and can fix this with changing inputs once.
|
|
|
|
Post by rulezy0 on Mar 30, 2020 19:40:01 GMT -5
I have installed V5.15 but its still not working fine. Eveytime i change to my apple Tv, i have to switch HDMI inputs to get a picture. Its really annoying. Will there be a working Update or is this V3 Board not working? Did not have any Problems with the V1 board
|
|
|
|
Post by AudioHTIT on Mar 30, 2020 21:13:18 GMT -5
|
|
