Sony FW 6.6510 and Harmony / Universal Remotes

[AudioHTIT]

I’ve mentioned this over at AVS and Logitech without much response, so thought I’d try here. When I first added my Sony 900F TV as a Harmony Device, it added a command not on the Sony remote; “Picture Mode” takes you directly to where you can adjust the picture AND where you can see if you’re getting an HDR or Dolby Vision signal, so it’s very handy (read ‘I use it regularly’)

When I recently upgraded to Sony firmware 6.6510, that command stopped working on my Harmony Elite Home. Only one other person at AVS has noticed this. I think the firmware broke the Sony’s ability to act on that command, and reported it to them.

So, does anyone with one of the Sony models listed below, have a Harmony (or other Universal remote), and firmware 6.6510 installed? If so does your ‘Picture Mode’ command work?

(It’s also possible other remotes might call it something besides “Picture Mode”, but it takes you directly to where you can switch between ‘Standard’, ‘Sports’, ‘Cinema’ etc. and make other picture adjustments)

Applicable Sony models for FW 6.6510
* KD-43X750F
* KD-49X750F
* KD-49X755F
* KD-55X750F
* KD-55X751F
* KD-55X755F
* KD-65X750F
* KD-65X755F
* KD-75X780F
* XBR-49X900F
* XBR-55A8F
* XBR-55X900F
* XBR-60X830F
* XBR-65A8F
* XBR-65X850F
* XBR-65X851F
* XBR-65X856F
* XBR-65X900F
* XBR-70X830F
* XBR-75X850F
* XBR-75X855F
* XBR-75X900F
* XBR-85X850F
* XBR-85X900F