|
|
Post by leonski on Oct 29, 2021 14:14:29 GMT -5
I could be wrong here, but the idea of MULTIPLE measurement locations may help with a null.....chance of measuring a null at the same frequency from 5 or more locaitons is slim.....
But gets more possible (not probable) as frequency drops.....Which I think is one of the problems measureing very low frequencies....
|
|
|
|
Post by jbrunwa on Oct 29, 2021 14:24:20 GMT -5
I could be wrong here, but the idea of MULTIPLE measurement locations may help with a null.....chance of measuring a null at the same frequency from 5 or more locaitons is slim..... But gets more possible (not probable) as frequency drops.....Which I think is one of the problems measureing very low frequencies.... I could be wrong, as I can't enable Dirac Live right now, but doesn't the "Detected Range" checkbox show you the full range of measurements in a shaded area? That should give an indication as to whether a null is detected at all measurement positions. |
|
Lsc
Emo VIPs 
Posts: 3,434
|
Post by Lsc on Oct 29, 2021 15:22:01 GMT -5
It is my understanding that for the XMC/RMC platform: 1. Emotiva has always planned to DLBC-enable the platform 2. Dirac must create and provide DLBC code to Emotiva, which Emotiva must incorporate into firmware, test and release 3. Customers must purchase DLBC as an option from Dirac I think that customers should expect the courtesy of a time frame for DLBC, so that we can make informed decisions. I would hate to switch to a another AVR only for Emotiva to release DLBC. In the very least, I think that we should at least be informed if Emotiva has a contractual commitment with Dirac to receive DLBC, because Dirac is probably pretty busy releasing product for Pioneer/Onkyo, and if we are depending on Dirac to deliver DLBC whenever they have time, we may never see it. If anyone is waiting for Emotiva to release DLBC then I’d recommend you move on and save yourself the angst. I come to these forum once a week or so to see if there is any news on DLBC. It’s been almost 1.5 years since Dirac was released. Almost beginning to think that Emotiva is just not admitting that DLBC will never come to see the light of day but still hoping it does since I have the XMC2. |
|
|
|
Post by leonski on Oct 29, 2021 17:13:46 GMT -5
I could be wrong here, but the idea of MULTIPLE measurement locations may help with a null.....chance of measuring a null at the same frequency from 5 or more locaitons is slim..... But gets more possible (not probable) as frequency drops.....Which I think is one of the problems measureing very low frequencies.... I could be wrong, as I can't enable Dirac Live right now, but doesn't the "Detected Range" checkbox show you the full range of measurements in a shaded area? That should give an indication as to whether a null is detected at all measurement positions. Any way to post a screen shot of that? It wouldnt' kill me to hear that 'a null' was detected at each position, just not at the same frequency at each...... How many positions does DIRAC recommend for a 'full run'....?? |
|
|
|
Post by jbrunwa on Oct 29, 2021 17:56:42 GMT -5
I could be wrong, as I can't enable Dirac Live right now, but doesn't the "Detected Range" checkbox show you the full range of measurements in a shaded area? That should give an indication as to whether a null is detected at all measurement positions. Any way to post a screen shot of that? It wouldnt' kill me to hear that 'a null' was detected at each position, just not at the same frequency at each...... How many positions does DIRAC recommend for a 'full run'....?? I might have been wrong, I think it’s the “Spread” option that shows the full spread of all measurements for a speaker. The number of positions depends on the focus selection. The full doc has the information. Also you can view the measurements after measuring each position.  |
|
ttocs
Global Moderator 
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,152
|
Post by ttocs on Oct 29, 2021 18:24:44 GMT -5
I might have been wrong, I think it’s the “Spread” option that shows the full spread of all measurements for a speaker. The number of positions depends on the focus selection. The full doc has the information. Also you can view the measurements after measuring each position. Thanks for posting that screenshot of the phone app, never seen one before. Things are a bit different. |
|
|
|
Post by jbrunwa on Oct 29, 2021 18:27:46 GMT -5
I might have been wrong, I think it’s the “Spread” option that shows the full spread of all measurements for a speaker. The number of positions depends on the focus selection. The full doc has the information. Also you can view the measurements after measuring each position. Thanks for posting that screenshot of the phone app, never seen one before. Things are a bit different. Sorry that’s not the app, I just pulled up the Dirac Live documentation on my phone and took a screenshot  |
|
ttocs
Global Moderator
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,152
|
Post by ttocs on Oct 29, 2021 18:35:36 GMT -5
Thanks for posting that screenshot of the phone app, never seen one before. Things are a bit different. Sorry that’s not the app, I just pulled up the Dirac Live documentation on my phone and took a screenshot Where's the emoji for embarrassed with the blushing cheeks? |
|
|
|
Post by jbrunwa on Oct 29, 2021 20:32:42 GMT -5
Sorry that’s not the app, I just pulled up the Dirac Live documentation on my phone and took a screenshot Where's the emoji for embarrassed with the blushing cheeks? I didn’t see that one in the BBcode editor, otherwise I would have used it. It is deserved though, I should have included that I was copying the manual. |
|
ttocs
Global Moderator
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,152
|
Post by ttocs on Oct 29, 2021 21:31:20 GMT -5
Where's the emoji for embarrassed with the blushing cheeks? I didn’t see that one in the BBcode editor, otherwise I would have used it. It is deserved though, I should have included that I was copying the manual. Sorry, I meant I am the one embarrassed. I didn't see that it was from a manual and not within an app. |
|
|
|
Post by jbrunwa on Oct 29, 2021 21:56:58 GMT -5
I didn’t see that one in the BBcode editor, otherwise I would have used it. It is deserved though, I should have included that I was copying the manual. Sorry, I meant I am the one embarrassed. I didn't see that it was from a manual and not within an app.  Another thing that I’ve had to remind myself is that especially with narrow and deep nulls is that often the graph looks worse than it sounds, especially if a null only occupies a fraction of an octave- 40 and 80 Hz are an octave apart. www.engineeringtoolbox.com/octave-bands-frequency-limits-d_1602.html |
|
|
|
Post by hsamwel on Oct 30, 2021 5:17:18 GMT -5
I could be wrong, as I can't enable Dirac Live right now, but doesn't the "Detected Range" checkbox show you the full range of measurements in a shaded area? That should give an indication as to whether a null is detected at all measurement positions. Any way to post a screen shot of that? It wouldnt' kill me to hear that 'a null' was detected at each position, just not at the same frequency at each...... How many positions does DIRAC recommend for a 'full run'....?? Dirac recommends atleast 9 positions.. Each point no less than about 2 feet from the MLP. Atleast a cube like measurement of 3feet/1m. But no position other than MLP is set, all the others can be anywhere really. It needs point above, under, front, back, left and right of the MLP. This is not always possible, like if you have a sofa or a big chair with a high back. Dirac makes the best of what it gets. They have said it could work with as little as 5 positions also, but then it will not be able to do its calibration in the best way. The more you measure the better Dirac does it. But there’s also a point where doing more measuring points makes no real difference.. |
|
|
|
Post by leonski on Oct 30, 2021 16:14:16 GMT -5
NINE positions sounds VERY reasonable. Next up, IMO? RECORD KEEPING to the 1/4" level for X, Y, and Z positions......
Use one of those laser levels IF you got one. Draw a plan of the room, too.......TAKE Careful Notes.
|
|
LCSeminole
Global Moderator
Res firma mitescere nescit.
Posts: 20,849
|
Post by LCSeminole on Oct 30, 2021 17:57:11 GMT -5
If anyone is waiting for Emotiva to release DLBC then I’d recommend you move on and save yourself the angst. I come to these forum once a week or so to see if there is any news on DLBC. It’s been almost 1.5 years since Dirac was released. Almost beginning to think that Emotiva is just not admitting that DLBC will never come to see the light of day but still hoping it does since I have the XMC2. As far as I know, DLBC is still an upcoming feature of the G3P's, as nothing has been stated otherwise by Emotiva. Just curious, do you know something that the rest of us don't? |
|
|
|
Post by jbrunwa on Oct 31, 2021 14:19:40 GMT -5
If anyone is waiting for Emotiva to release DLBC then I’d recommend you move on and save yourself the angst. I come to these forum once a week or so to see if there is any news on DLBC. It’s been almost 1.5 years since Dirac was released. Almost beginning to think that Emotiva is just not admitting that DLBC will never come to see the light of day but still hoping it does since I have the XMC2. As far as I know, DLBC is still an upcoming feature of the G3P's, as nothing has been stated otherwise by Emotiva. Just curious, do you know something that the rest of us don't? I think that people may be reacting to the long silence from Emotiva regarding DLBC while over the same time period other Dirac licensees have released it. |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,033
|
Post by cawgijoe on Oct 31, 2021 18:07:22 GMT -5
As far as I know, DLBC is still an upcoming feature of the G3P's, as nothing has been stated otherwise by Emotiva. Just curious, do you know something that the rest of us don't? I think that people may be reacting to the long silence from Emotiva regarding DLBC while over the same time period other Dirac licensees have released it. Maybe try calling Emotiva and asking? Not sure if you will get an answer or update, but worth a try. |
|
Lsc
Emo VIPs
Posts: 3,434
|
Post by Lsc on Oct 31, 2021 23:26:34 GMT -5
As far as I know, DLBC is still an upcoming feature of the G3P's, as nothing has been stated otherwise by Emotiva. Just curious, do you know something that the rest of us don't? I think that people may be reacting to the long silence from Emotiva regarding DLBC while over the same time period other Dirac licensees have released it. Zero communication about DLBC in 2021. I just don’t know anymore. My unit now has less than 3 years of warranty left. |
|
|
|
Post by zingo77 on Nov 3, 2021 4:02:36 GMT -5
I think that people may be reacting to the long silence from Emotiva regarding DLBC while over the same time period other Dirac licensees have released it. Zero communication about DLBC in 2021. I just don’t know anymore. My unit now has less than 3 years of warranty left. My patience is soon history. Please Emotiva, give us news regarding DLBC. Any news, good or bad, is better then silence… |
|
|
|
Post by northernlights on Nov 6, 2021 11:29:20 GMT -5
I'm getting ready to do my first-ever run of Dirac, using my XMC-2 and Macbook Pro. I'll be honest, I'm a little nervous about the whole thing because it seems more complicated than room correction software I've used in the past, but I know the results will be worth it if I do it right.
1. Is it necessary to use the ethernet switch that came with the Dirac kit? Can I forgo it if I have enough open ports on my WiFi router to plug in the XMC-2 and the Dirac interface box?
2. Is there any benefit to creating a Dirac account?
3. Should I set speakers to small/large and set crossovers as appropriate before running Dirac?
4. I was wondering about setting levels/distances before running Dirac, and I do see this in the FAQ at the top of this thread: Q: Should I set my Speaker Levels and Distance before running Dirac?
A : Dirac ignores both the level and distance settings when it takes measurements, however there is a User Slot where distance is in effect.
What I'm not sure I understand is the "User Slot where distance is in effect" part. Can anyone elaborate on that?
5. Assuming that I should set speaker distances before running Dirac, would it be best to do that with a laser distance measuring tool? Does anyone have one they recommend that's as inexpensive as possible while still being accurate for the purposes of measuring the speaker distances?
6. Are there any other noob pitfalls I should be looking out for as I do this?
Thanks so much in advance.
|
|
|
|
Post by marcl on Nov 6, 2021 12:39:11 GMT -5
I'm getting ready to do my first-ever run of Dirac, using my XMC-2 and Macbook Pro. I'll be honest, I'm a little nervous about the whole thing because it seems more complicated than room correction software I've used in the past, but I know the results will be worth it if I do it right. 1. Is it necessary to use the ethernet switch that came with the Dirac kit? Can I forgo it if I have enough open ports on my WiFi router to plug in the XMC-2 and the Dirac interface box? 2. Is there any benefit to creating a Dirac account? 3. Should I set speakers to small/large and set crossovers as appropriate before running Dirac? 4. I was wondering about setting levels/distances before running Dirac, and I do see this in the FAQ at the top of this thread: Q: Should I set my Speaker Levels and Distance before running Dirac? A : Dirac ignores both the level and distance settings when it takes measurements, however there is a User Slot where distance is in effect. What I'm not sure I understand is the "User Slot where distance is in effect" part. Can anyone elaborate on that? 5. Assuming that I should set speaker distances before running Dirac, would it be best to do that with a laser distance measuring tool? Does anyone have one they recommend that's as inexpensive as possible while still being accurate for the purposes of measuring the speaker distances? 6. Are there any other noob pitfalls I should be looking out for as I do this? Thanks so much in advance. 1. You can use your own switch as long as the processor and your computer are on the same network. 2. With an account you can report bugs and get a response. 3. Dirac ignores speaker size and crossovers, so it doesn't matter. 4. The User slot is not Dirac, it's for using the PEQ filters. Distance and Levels are in effect. 5. Dirac sets the distance for you, so no need to do it unless you use the User slot. 6. Look at the first post in this thread for updates on how to set levels. Published tutorials are mostly out of date due to updates Dirac has done in the past year. |
|
