capn
Minor Hero
Posts: 44
|
Post by capn on Aug 2, 2024 18:22:36 GMT -5
None of the recent versions of dirac live work for me on my windows laptop. I get the "imprecise measurement" no matter what I do (the new environment variable doesn't help). Thankfully, I have a 3 year-old version of the dirac live installation file (circa 3.2) that allowed me to downgrade to a version that works.
Just curious if anyone who has previously encountered the "imprecise measurement" error was able to fix that in some way OTHER than adding the new environment variable.
|
|
|
Post by foggy1956 on Aug 2, 2024 18:44:27 GMT -5
None of the recent versions of dirac live work for me on my windows laptop. I get the "imprecise measurement" no matter what I do (the new environment variable doesn't help). Thankfully, I have a 3 year-old version of the dirac live installation file (circa 3.2) that allowed me to downgrade to a version that works. Just curious if anyone who has previously encountered the "imprecise measurement" error was able to fix that in some way OTHER than adding the new environment variable. The only way that I could get past the imprecise measurement was to remove my 2 rear speakers while doing the calibration. I run a 7.2.4 speaker setup and had to drop down to 5.2.4 to get a correct run. Neither Emotiva nor Dirac could offer another solution.
|
|
capn
Minor Hero
Posts: 44
|
Post by capn on Aug 2, 2024 22:14:04 GMT -5
None of the recent versions of dirac live work for me on my windows laptop. I get the "imprecise measurement" no matter what I do (the new environment variable doesn't help). Thankfully, I have a 3 year-old version of the dirac live installation file (circa 3.2) that allowed me to downgrade to a version that works. Just curious if anyone who has previously encountered the "imprecise measurement" error was able to fix that in some way OTHER than adding the new environment variable. The only way that I could get past the imprecise measurement was to remove my 2 rear speakers while doing the calibration. I run a 7.2.4 speaker setup and had to drop down to 5.2.4 to get a correct run. Neither Emotiva nor Dirac could offer another solution. Thanks. In my case, I dropped the setup to just two front speakers (mainly in the interest of time while I tried different things), but that didn't help. Oh well, it won't be the first time I've spent $100 on something that didn't work.
|
|
|
Post by foggy1956 on Aug 3, 2024 6:29:36 GMT -5
The only way that I could get past the imprecise measurement was to remove my 2 rear speakers while doing the calibration. I run a 7.2.4 speaker setup and had to drop down to 5.2.4 to get a correct run. Neither Emotiva nor Dirac could offer another solution. Thanks. In my case, I dropped the setup to just two front speakers (mainly in the interest of time while I tried different things), but that didn't help. Oh well, it won't be the first time I've spent $100 on something that didn't work. That's where I started and then kept adding groups until it failed, maybe try just the surrounds?
|
|
|
Post by jjkessler on Aug 3, 2024 19:13:56 GMT -5
Went to rerun Dirac tonight. Dirac sees the RMC and Mic just fine but, Dirac says it canβt find the mic calibration file when Iβm selecting it right from the Dirac software and it sees the file (then says it canβt find the file). Anyone run into this? Itβs running on MAC/IOS
|
|
|
Post by jjkessler on Aug 4, 2024 10:44:10 GMT -5
So I was able to make it through Dirac 13 position measurements, create the filter and load them to my RMC. Now it wonβt let me unselect DIRAC on the EMC, any ideas how to fix this?
|
|
geebo
Emo VIPs
"Too bad that all the people who know how to run the country are driving taxicabs and cutting hair"
Posts: 24,422
|
Post by geebo on Aug 4, 2024 10:50:33 GMT -5
So I was able to make it through Dirac 13 position measurements, create the filter and load them to my RMC. Now it wonβt let me unselect DIRAC on the EMC, any ideas how to fix this? Did you try pressing down on the front encoder on the RMC?
|
|
|
Post by jjkessler on Aug 4, 2024 11:22:14 GMT -5
Yes and non responsive. Did a full power off restart. Remote is no longer responding along with other functions (canβt get to menu) sounds like filter loaded though. If can just get control back and use of the remote, the family (and me) would be very grateful
|
|
|
Post by octavarium on Aug 4, 2024 15:20:21 GMT -5
Yes and non responsive. Did a full power off restart. Remote is no longer responding along with other functions (canβt get to menu) sounds like filter loaded though. If can just get control back and use of the remote, the family (and me) would be very grateful Did you try to do the selection with the mic and the interface box still plugged in?
|
|
|
Post by jjkessler on Aug 4, 2024 16:04:30 GMT -5
I believe they were still all connected. Now they are not and will turn it back On and check it again. Not sure of the best way forward if nothing has changed
|
|
|
Post by ttocs on Aug 4, 2024 17:05:47 GMT -5
I believe they were still all connected. Now they are not and will turn it back On and check it again. Not sure of the best way forward if nothing has changed Are you able to view the complete Menu system including SETUP when using the Front Panel controls?
|
|
|
Post by jjkessler on Aug 4, 2024 18:54:59 GMT -5
It is all good after a longer power cycle. Issue with the remote was an easy oneβ¦remote fell off couch and bumped the battery out of its holderβ¦all is good and working as expected
|
|
|
Post by AudioHTIT on Aug 24, 2024 14:21:15 GMT -5
Donβt know if this was mentioned here, but it looks like DLBC is now a single license for however many subs you have, so for multiple subs, a $150 savings. All the more reason to hope for DLBC in the G4P! www.dirac.com/live/bass-control/
|
|
|
Post by marcl on Aug 29, 2024 13:54:51 GMT -5
|
|
kcdc
Seeker Of Truth
Posts: 4
|
Post by kcdc on Sept 10, 2024 19:08:00 GMT -5
Is there a reason why Dirac won't allow re-measurement of a single speaker, instead of being forced to redo all 16 speakers if a random noise happens accidentally after speaker 14. Definitely miss that from MulteqX. Made life sweeter. Or please tell me I'm an idiot and the feature exists somewhere.
Or just let me measure per-speaker as an option.
|
|
|
Post by marcl on Sept 10, 2024 22:08:27 GMT -5
Is there a reason why Dirac won't allow re-measurement of a single speaker, instead of being forced to redo all 16 speakers if a random noise happens accidentally after speaker 14. Definitely miss that from MulteqX. Made life sweeter. Or please tell me I'm an idiot and the feature exists somewhere.
Or just let me measure per-speaker as an option.
There is a good reason. To remeasure a single speaker you would have to accurately place the mic in 9 ... 13 .... 17 positions that match the positions that the other speakers were measured? You can't do that. If you save the measurements as a project before going to Filter Design you can reload them and retake measurement positions (all speakers) ... but it is impossible to retake a single speaker.
|
|