|
Post by daveczski65 on Oct 31, 2020 10:43:26 GMT -5
Ok guys I am pretty good with this stuff,,but I am new to this HDMI ARC,and how it works. Just hooked up LG OLED 65CX, I am using the TV for all my steaming instead of using fire stick,as its all on TV already and 4k. But I clan only get sound to my Integra receiver from the streaming apps on tv,,when I go to my blu-ray input not getting anything, What am I doing wrong? Do I need a blu-ray with outputs for video and audio?
|
|
|
Post by daveczski65 on Oct 31, 2020 11:11:48 GMT -5
Ok i get sound now,but won't decode for audio format..?
|
|
|
Post by daveczski65 on Oct 31, 2020 11:59:36 GMT -5
Ok i figured out,,you can't pass 5.1 over arc, guess its time for a XMC 2
|
|
|
Post by doc1963 on Oct 31, 2020 12:16:24 GMT -5
Ok i get sound now,but won't decode for audio format..? Not sure I’m totally understanding how you have your sources connected (and to where), but if you have your Blu-ray player connected directly to your CX, then it’s quite likely that it’s a DTS based soundtrack that the CX does not support. LG has dropped support for DTS beginning with the 2020 series and cannot internally decode them. If that’s the case, then you have a few options. First, plug you Blu-ray player directly into your AVR. Second, set your Blu-ray player to decode internally and send PCM. Lastly, purchase a Thenaudio ShARC (eARC to HDMI adapter) and use eARC to bitstream from your CX. Read more about the ShARC... HEREHope this might help...
|
|
|
Post by daveczski65 on Oct 31, 2020 12:26:24 GMT -5
Ok i get sound now,but won't decode for audio format..? Not sure I’m totally understanding how you have your sources connected (and to where), but if you have your Blu-ray player connected directly to your CX, then it’s quite likely that it’s a DTS based soundtrack that the CX does not support. LG has dropped support for DTS beginning with the 2020 series and cannot internally decode them. If that’s the case, then you have a few options. First, plug you Blu-ray player directly into your AVR. Second, set your Blu-ray player to decode internally and send PCM. Lastly, purchase a Thenaudio shARC (eARC to HDMI adapter) and use eARC to bitstream from your CX. Read more about the shARC... HEREHope this might help... Thanks doc Wound up just running blu-ray threw integra so I get decode,but no 4k to tv,as its an older integra. I do get sound from apps on TV now also,was just a matter of figuring out settings on integra. But def going to upgrade to XMC 2 so I can send 4k to tv and have better sound quality.Good excuse to use my 40 off before they don't accept anymore. Thanks again for your help.
|
|