Germotiva
Minor Hero
Alter Mann über 50 aus Deutschland
Posts: 90
|
Post by Germotiva on Jan 29, 2021 21:33:58 GMT -5
Hello from Germany.Please help me. The Setup Button on the Menu from the RMC1 l is missing. Zone2,Tuner,Information,Main Zone, are available. Setup no. i have the Power Button off and restart the RMC1L. the Setup ist Not there. What can i do. the Factory restart is Not goining on with the Setup Button 🤷♂️
|
|
|
Post by ttocs on Jan 29, 2021 21:52:41 GMT -5
Ok, I'll bite. Scrolling in the Menu you see:
Information Main Zone Zone 2 Tuner
And under Tuner should be: Setup But you do not see Setup?
Are you trying to do a Factory Reset?
|
|
|
Post by ttocs on Jan 29, 2021 21:59:02 GMT -5
Have you tried unplugging power for a couple minutes, then restarting?
I've never heard of not having a Menu option. Strange.
|
|
Germotiva
Minor Hero
Alter Mann über 50 aus Deutschland
Posts: 90
|
Post by Germotiva on Jan 30, 2021 3:12:13 GMT -5
Hello ttocs, Yes i unplugging power for a couple minutes, then restarting. It‘s the same Problem. I Look in the Manuel for the Factory Reset. I cant Not to do this, i have/see no Setup Button for to start the reset 😭
Technical Support. To perform a Factory Reset on your RMC-1: • Press the Menu button. • Use the Up/Down buttons to select Setup; press the Right button to enter the Setup menu. • Use the Up/Down buttons to select Advanced; press the Right button to enter the Advanced Setup menu. • Use the Up/Down buttons to select Factory Reset; press the Right button to enter the confirmation screen. • Use the Up button to confirm your choice; the confirmation box will change to “X”. • Use the Left button to confirm the reset. • You will see a status message indicating that the Factory Reset is in progress, and another message to confirm when it is completed. • You may exit the Setup Menu as soon as the “Done” status message appears.
|
|
Germotiva
Minor Hero
Alter Mann über 50 aus Deutschland
Posts: 90
|
Post by Germotiva on Jan 30, 2021 3:24:59 GMT -5
I am at a loss 😞😔😣😖😫😭
|
|
|
Post by doc1963 on Jan 30, 2021 5:11:59 GMT -5
Hello from Germany.Please help me. The Setup Button on the Menu from the RMC1 l is missing. Zone2,Tuner,Information,Main Zone, are available. Setup no. i have the Power Button off and restart the RMC1L. the Setup ist Not there. What can i do. the Factory restart is Not goining on with the Setup Button 🤷♂️ It sounds to me like you’ve accidentally locked yourself out by turning “Setup Lock” on in the advanced settings menu. Try this... on the front panel of your RMC-1L (not the remote), press and hold in the rotary encoder knob. Then (while still holding in the rotary knob), press the “standby” button. This should take you to the Advanced menu. While in the Advanced menu, go to “Setup Lock” and make sure it’s set to “ None”.
|
|
Germotiva
Minor Hero
Alter Mann über 50 aus Deutschland
Posts: 90
|
Post by Germotiva on Jan 30, 2021 5:39:45 GMT -5
thank you very much you are my hero.it worked.💪 this problem is missing in the manual. germotiva says thank you to usa you are a great team
|
|
|
Post by bolle on Jan 30, 2021 5:41:23 GMT -5
No it is not missing from the manual. I sent you the link and mentioned the page (52) in a message in the german forum ... Again "RTFM" saves the day!
|
|
Germotiva
Minor Hero
Alter Mann über 50 aus Deutschland
Posts: 90
|
Post by Germotiva on Jan 30, 2021 6:08:04 GMT -5
😂Thank you Bolle.🤝 The old German potato and English.🤪
|
|