Post by Lonnie on Nov 9, 2009 17:53:34 GMT -5
XMC-1 Audio/Video Media Processor/Controller – (updated November 8,2009)
The Emotiva XMC-1 is a state of the art, high end multichannel preamplifier/processor with an integral high performance video scaling engine. It incorporates a wide array of features designed to enhance both stereo and multichannel music, and acts as the centerpiece and command center for a reference quality HD cinema and music system.
Features
Twin Cirrus® 32 bit dual core DSP’s for uncompromised high resolution HD audio decoding
Decoding support for Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Digital True HD, Dolby PLIIx, DTS, DTSES, DTS HD, DTS Master Audio, DTS Neo 6, SPDIF, PCM 8 channel (note: some audio formats only supported via HDMI)
Wireless or wired internet radio capability featuring the Frontier Silicon
Venice 6.2 streaming engine; allows live internet radio broadcast reception, Pandora, Sirius/XM internet radio, FM, etc.
Multichannel Dolby Volume
Genesis® Torino high performance video scaling engine with full Faroujda DCDi®
Dual HDMI outputs for main and secondary displays – selectable
Full HDMI 1.3a support
Front panel direct access control for inputs
Absolute HDMI “reference” bypass mode – hardware enabled, supports advanced bit depths
Automatic Emo-Q™ multi channel room correction and automatic loudspeaker setup. Calibrated measurement microphone included.
Quadruple bass manager with independently selectable high and low pass frequencies from 40hz – 225hz in 5Hz and 10Hz increments, frequency selective.
Independently selectable HP/LP slope rates of 12 or 24 db/octave for all speaker groups
All legacy video inputs can be scaled and output over HDMI at up to 1080p 60Hz
HDMI sources can be format converted to component (subject to Macrovison restrictions)
Full color graphical OSD over live video on all video formats with variable transparency
All inputs assignable and feature input labeling, selectable decode modes, selectable triggers, etc.
Independent graphic EQ for all channels
Global bass and treble controls by channel groups
0.5dB level trims on all channels
Headphone output – front panel, with high current discrete headphone amplifier circuitry
Professional balanced (XLR) line outputs on main 7.1 channels with fully discrete balanced line driver stages for exceptional fidelity and high common mode rejection.
Premium quality signal path and component selection for uncompromised audio/video performance
High voltage, low impedance discrete single ended (RCA) analog output stages
5 - HDMI inputs and 2 HDMI outputs.
1 - Precision phono input with MC/MM capability
1 - composite video input (RCA)
1 - S-video input (S-video mini DIN)
3 - component video inputs (RCA)
1 - component video outputs (RCA) main
4 - stereo analog audio inputs (RCA)
1 - stereo XLR input pair (special high fidelity pure analog signal path)
1 - 7.1 analog input set (RCA)
4 - coaxial digital inputs, (RCA)
4- optical digital inputs (Toslink)
1- coax digital audio output (RCA)
1- optical digital audio output (Toslink)
1 - Stereo or 2 channel analog multichannel mix down output for fixed level monitoring (RCA)
1- stereo analog variable and independent Zone 2 output (RCA)
1 - stereo analog fixed level record output (RCA)
Full RS-232 control
4 - assignable trigger outputs Movie/Music/Ampx2 (3.5mm mini)
1- IR remote input (3.5mm mini)
1 - IR output (3.5mm mini)
1 - microphone input (3.5mm stereo mini)
1- USB data input (for software upgrades only)
1- Milled aluminum remote
3- RU chassis
Note: All trademarks and trade names are the property of their respective owners.