|
|
Post by bucket23 on Nov 11, 2010 15:17:09 GMT -5
I need to split one rca out from my Integra pre amp to 4 rca's on my UPA5 (I have rear dipoles with two tweeters and two woofers in each speaker that I am amping all drivers individually {passive crossovers}).
Can anyone tell me if I passively split the rca from one y adaptor then to two y adaptors (which gives me 1 rca out to 4 rca outs) would work or would the signal be two low.
Would I need an active rca splitter (amplifier) and if so, does any body have some recommendations.
Thanks.
|
|
selkec
Emo VIPs 
SCREW YOU GUYS, IM GOING HOME!!!
Posts: 3,779
|
Post by selkec on Nov 11, 2010 17:25:50 GMT -5
If it were me I would not go this route. I'm sure others will agree. In most cases you are not going to hear any difference. Im sure someone will chime in here and explain as to why. No need to complicate things for little if any benefit. Just my .02  |
|
|
|
Post by bucket23 on Nov 11, 2010 17:49:13 GMT -5
Eventually I will be using active crossovers, which will have an internal amplified splitter. However in the mean time I would like to get them working with the passive crossovers.
|
|
selkec
Emo VIPs
SCREW YOU GUYS, IM GOING HOME!!!
Posts: 3,779
|
Post by selkec on Nov 11, 2010 17:59:42 GMT -5
Oh. Then that makes more sense. I was going to suggest you make it active but its more complicated than most want to try to do.
|
|
|
|
Post by bucket23 on Nov 12, 2010 22:07:37 GMT -5
Does anybody from Emotiva have an answer to the rca splitting? I don't want to spend $50-$100 on splitters only to find out I should of bought an amplified splitter.
|
|
hemster
Global Moderator 
Particle Manufacturer
...still listening... still watching
Posts: 51,921
|
Post by hemster on Nov 12, 2010 22:53:48 GMT -5
Does anybody from Emotiva have an answer to the rca splitting? I don't want to spend $50-$100 on splitters only to find out I should of bought an amplified splitter. How about this? emotiva.com/xrca1x2.shtm |
|
|
|
Post by bucket23 on Nov 13, 2010 18:03:09 GMT -5
Yes, those splitters will work, but my question is can I use thre of these for a 1 to 4 way split from me pre to my UPA5 and it still work or do I need an active (amplification) splitter?
|
|
