|
BasX-A800
Apr 19, 2016 17:08:03 GMT -5
via mobile
Post by gus4emo on Apr 19, 2016 17:08:03 GMT -5
Hi all, so since this amp is bridgeable, would it be a good idea to bridge 4 pairs to power 4 Atmos speakers?
|
|
|
Post by jackpine on Apr 19, 2016 17:10:34 GMT -5
Yes, as long as they are 8 Ohm speakers.
|
|
|
BasX-A800
Apr 19, 2016 17:15:24 GMT -5
via mobile
Post by gus4emo on Apr 19, 2016 17:15:24 GMT -5
Yes, as long as they are 8 Ohm speakers. Or would it be better to use two BasX A-150, that will make it 4 channels at 75 watts each, that should also work for Atmos channels, what do you think?
|
|
|
Post by jackpine on Apr 19, 2016 20:53:26 GMT -5
Either would work fine with 8 Ohm speakers. I'd lean towards the A800 myself for simplicity.
|
|
|
Post by creimes on Apr 19, 2016 22:07:36 GMT -5
nice amp for zone speakers and great to have something coming back to market finally after the Sherbourn zone amps were discontinued
|
|
|
BasX-A800
Apr 19, 2016 22:19:06 GMT -5
via mobile
Post by gus4emo on Apr 19, 2016 22:19:06 GMT -5
Either would work fine with 8 Ohm speakers. I'd lean towards the A800 myself for simplicity. I'm thinking ahead so when I jump into Atmos, I will see what the specs are on the new class D amps...
|
|
|
Post by creimes on Apr 19, 2016 22:41:52 GMT -5
If you only need 4 channels the A500 amp would give you 100 watts a channel for less money just a thought Chad
|
|
|
BasX-A800
Apr 19, 2016 22:49:50 GMT -5
via mobile
Post by gus4emo on Apr 19, 2016 22:49:50 GMT -5
If you only need 4 channels the A500 amp would give you 100 watts a channel for less money just a thought Chad That's a good idea, I can use 4 channels out of it, saving some juice not using the 5th channel.
|
|