seras
Minor Hero
Posts: 18
|
Post by seras on Aug 8, 2020 19:46:05 GMT -5
I have 1 sub. Should I set to mono or LFE? My front speakers are large.
|
|
|
Post by megash0n on Aug 8, 2020 19:57:34 GMT -5
I have 1 sub. Should I set to mono or LFE? My front speakers are large. I would think Mono. It will get lfe and any data from speakers set to small.
|
|
seras
Minor Hero
Posts: 18
|
Post by seras on Aug 8, 2020 20:03:34 GMT -5
So if I set to LFE, and front speakers to large, the front speakers will not get the LFE data?
|
|
|
Post by ttocs on Aug 8, 2020 22:40:35 GMT -5
So if I set to LFE, and front speakers to large, the front speakers will not get the LFE data? Correct. Connect the sub to the Center Sub output, and set that in the Menu to Mono. As megash0n said, it will receive the bass for any speaker set to Small as well as LFE. If you have no speakers set to Small, then only the LFE will go to the sub. Here's maybe a better way to show this. Center Sub set to Mono = Bass mangement, and LFE Center Sub set to LFE = LFE only Only the subwoofers will get LFE.
|
|
|
Post by thezone on Aug 9, 2020 4:16:42 GMT -5
I might add one more -
If Enhanced bass is set to "Enabled" then any bass from Large speakers is also sent to the sub (The range of frequencies which is shared with other speakers by speakers set to Large is still controlled by their configured crossover frequency. The default setting for this is 80 Hz, but it may be changed by temporarily setting each speaker to Small, and then adjusting the Crossover Frequency setting associated with it).
But Music is rendered more accurately when Enhanced Bass is DISABLED
|
|
seras
Minor Hero
Posts: 18
|
Post by seras on Aug 9, 2020 19:09:48 GMT -5
I might add one more - If Enhanced bass is set to "Enabled" then any bass from Large speakers is also sent to the sub (The range of frequencies which is shared with other speakers by speakers set to Large is still controlled by their configured crossover frequency. The default setting for this is 80 Hz, but it may be changed by temporarily setting each speaker to Small, and then adjusting the Crossover Frequency setting associated with it). But Music is rendered more accurately when Enhanced Bass is DISABLED What about reference stereo mode? Will Enhanced bass or LFE do anything? sub isn't enabled in the mode
|
|
|
Post by AudioHTIT on Aug 9, 2020 20:52:57 GMT -5
Is there some reason you don’t post all these topics / questions in the Official RMC/XMC or Dirac threads where others can benefit from the discussion over time?
|
|