|
Post by lawnsausage on Nov 15, 2022 20:56:53 GMT -5
Is there an issue with the rmc-1 passing through 4k from an Xbox series x? Just hooked up, it works fine in 1080ode, but 4k won’t display, and 1440 shows lines on the screen. Went through calibration, the xbox is recognizing the tv as 4k, all seems to check out. Cables seem fine I used the xbox hdmi that came with, and bought a 4k certified one for the processor to tv. Can’t seem to find any in tv settings to accommodate as well, and the 4k details menu all items check out. Is this an issue with hdmi 2.0?
|
|
geebo
Emo VIPs
"Too bad that all the people who know how to run the country are driving taxicabs and cutting hair"
Posts: 24,188
|
Post by geebo on Nov 15, 2022 21:06:53 GMT -5
Is there an issue with the rmc-1 passing through 4k from an Xbox series x? Just hooked up, it works fine in 1080ode, but 4k won’t display, and 1440 shows lines on the screen. Went through calibration, the xbox is recognizing the tv as 4k, all seems to check out. Cables seem fine I used the xbox hdmi that came with, and bought a 4k certified one for the processor to tv. Can’t seem to find any in tv settings to accommodate as well, and the 4k details menu all items check out. Is this an issue with hdmi 2.0? If you haven't already, you might try turning off the RMC with the rear power switch and physically unplug the TV and the Xbox for a minute then plug them back in and switch on the RMC. That would be the first thing to try. They will all relearn the EDIDs and will often cure such things.
|
|
|
Post by lawnsausage on Nov 15, 2022 22:42:20 GMT -5
Is there an issue with the rmc-1 passing through 4k from an Xbox series x? Just hooked up, it works fine in 1080ode, but 4k won’t display, and 1440 shows lines on the screen. Went through calibration, the xbox is recognizing the tv as 4k, all seems to check out. Cables seem fine I used the xbox hdmi that came with, and bought a 4k certified one for the processor to tv. Can’t seem to find any in tv settings to accommodate as well, and the 4k details menu all items check out. Is this an issue with hdmi 2.0? If you haven't already, you might try turning off the RMC with the rear power switch and physically unplug the TV and the Xbox for a minute then plug them back in and switch on the RMC. That would be the first thing to try. They will all relearn the EDIDs and will often cure such things. Well that worked! Not the first time the RMC has gotten a hard reboot for weird stuff. But as long as I don’t make changes it’s fine. Make a change, general rule is reboot!
|
|
cawgijoe
Emo VIPs
"We made too many of the wrong mistakes." - Yogi Berra
Posts: 4,907
|
Post by cawgijoe on Nov 16, 2022 8:23:21 GMT -5
If you haven't already, you might try turning off the RMC with the rear power switch and physically unplug the TV and the Xbox for a minute then plug them back in and switch on the RMC. That would be the first thing to try. They will all relearn the EDIDs and will often cure such things. Well that worked! Not the first time the RMC has gotten a hard reboot for weird stuff. But as long as I don’t make changes it’s fine. Make a change, general rule is reboot! These things are computers after all. I'm constantly having to reboot my work computer due to updates.
|
|