jevans
Seeker Of Truth
Posts: 1
|
Post by jevans on Jun 7, 2023 18:22:24 GMT -5
After swapping my tv for a newer one I have no sound in the right channel. I have an xpa-5 amp with umc-200 preamp. I have swapped speakers cables then I have sound on the right not the left channel. I have tried different cd players and different inputs still no sound on the one channel. I changed the 3 fuses on the left hand side if the xpa-5. Tested fuses before installing no change. Any ideas? I would appreciate any assistance.
|
|
|
|
Post by spiette on Jun 19, 2023 7:27:33 GMT -5
It's not clear from your description if the issue in the UMC-200 or the XPA-5.
Try to isolate the two by using what ever channel is currently working and connect it to each of the 5 channels XPA. If they all work you know it not the amp. If one fails double check the speaker connection, again by swapping with one that is working.
Given that you swapped the speaker connection between the right and left and the problem moved you need to go up the chain and see where it starts.
|
|
