|
|
Post by napabill on Apr 28, 2010 16:52:40 GMT -5
I will be taking delivery on my UMC-1 in a couple of weeks and I'm starting to organize my thoughts on the wiring. I currently have a Velodyn ULD-18, and the "Power Servo Controller" assumes you will be inputing a right and left channel from the preamp (see attached diagram). How do I utilize the single XLR Subwoofer output from the UMC-1? Plug it into a splitter?
Thanks.
|
|
NorthStar
Seeker Of Truth
"And it stoned me to my soul" - Van Morrison
Posts: 0
|
Post by NorthStar on Apr 28, 2010 17:10:56 GMT -5
^ Yup.  |
|
|
|
Post by rooster on Apr 29, 2010 0:45:35 GMT -5
nice sub! i've got the ULD 15. i use an rca cable, not xlr, connected to the left input on the servo. i don't think a splitter is really needed - can't remember if the manual specifically addresses this setup.
|
|
|
|
Post by napabill on May 2, 2010 15:42:57 GMT -5
I can find no reference to my situation in the UMC-1 manual. Am hopeful that someone from Emotiva (Lonnie?) might be able to give me the preferred approach.
|
|
bootman
Emo VIPs 
Typing useless posts on internet forums....
Posts: 9,358
|
Post by bootman on May 3, 2010 10:31:55 GMT -5
No need for a splitter.
Treat the sub out as a mono input and run a rca cable to either the left or right as stated in the manual. (page 5)
The L & R inputs gets summed internally anyway which is why this will work.
|
|
|
|
Post by m3adjuster on May 6, 2010 0:21:40 GMT -5
I have a single XLR plugged into my Velodyne FSR-18 and the volume is on "4" and it can shake the windows.
|
|
