|
|
Post by wizardofoz on Jan 20, 2011 2:34:54 GMT -5
Just got a shipment of Emo Accessories and opened up both the ET-3 trigger boxes to find all STEREO 3.5mm trigger cables... anyone else had this? I thought all the trigger cables needed to be mono.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2011 2:55:43 GMT -5
I have tried to use stereo cables but they do not work. They have to be mono to work properly.
|
|
cawgijoe
Emo VIPs 
"We made too many of the wrong mistakes." - Yogi Berra
Posts: 4,913
|
Post by cawgijoe on Jan 20, 2011 15:20:05 GMT -5
Try them out first.
|
|
|
|
Post by wizardofoz on Jan 20, 2011 17:48:20 GMT -5
Vincent just emailed me re this and will they will be sending out some replacement mono cables to me..
As always Emotiva after sales service is top notch. At least for any any issues I have had.
Important fo anyone else who may have purchased the ET-3's lately - this looks like a supply issue so check your cables are the mono type.
|
|
jlafrenz
Global Moderator 
I don't want to jump in, unless this music's thumping
Posts: 7,722
|
Post by jlafrenz on Jan 20, 2011 21:23:58 GMT -5
I use stereo cable and they work just fine with my gear.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2011 22:49:51 GMT -5
I've used stereo with mine also with no problems.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 21, 2011 10:46:48 GMT -5
I've used stereo with mine also with no problems. It definitely depends on the gear. When i had my UMC-1 it would accept stereo cables but my Integra will not work properly unless i use mono cables. |
|
|
|
Post by roadrunner on Jan 21, 2011 19:11:29 GMT -5
I have used both mono and stereo with Emo gear. Both work on any of the Emo gear I have tried. Many Lounge members have reported using stereo on all of their gear without incident.
If you already have a trigger cable try it. There is a good chance it will work... regardless of mono vs stereo. If it does NOT work then get the mono trigger at Radio Shack or your favorite cable dealer.
|
|
|
|
Post by bdtae5656 on Feb 11, 2011 12:10:27 GMT -5
Im having problems finding a wall wart at Radio shack for my XPA-5), anybody have any ideas on where i can pick one up at? Also, does anybody know how to trigger on a Rotel 990BX (its old and doesnt have a 12v trigger)
Thanks,
|
|
DYohn
Emo VIPs
Posts: 18,352
|
Post by DYohn on Feb 11, 2011 12:17:45 GMT -5
|
|
|
|
Post by bdtae5656 on Feb 11, 2011 12:32:02 GMT -5
ok great!!! So for the XPA-5 just hook the mono plug into the amp and power source to my Receiver
and the Rotel Im assuming im going to need a mulit 12v triger is that right? (ET-A)
|
|
|
|
Post by DGM on Feb 11, 2011 17:47:11 GMT -5
Thank you *very* much for the link to the Russound 12v triggered outlet. I have been trying to figure out how to trigger my old NHT sub amp which does not have a 12 volt trigger. The Russound unit looks like a cleaner/better solution than using a "smart" power bar. Cheers, Deral |
|
DYohn
Emo VIPs
Posts: 18,352
|
Post by DYohn on Feb 11, 2011 17:57:32 GMT -5
Thank you *very* much for the link to the Russound 12v triggered outlet. I have been trying to figure out how to trigger my old NHT sub amp which does not have a 12 volt trigger. The Russound unit looks like a cleaner/better solution than using a "smart" power bar. Cheers, Deral No prob. They also make some with multiple outpets if you need that. |
|
|
|
Post by bdtae5656 on Feb 15, 2011 11:08:05 GMT -5
also try this Niles AC-3 Voltage Triggered AC Power Strip
|
|
