|
|
Post by darekdz on Feb 11, 2011 15:52:02 GMT -5
Hi,
are yours XDAs have the same front panel colour like rest of emo equipment? Mine is clearly lighter.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2011 16:48:01 GMT -5
Post a picture, so we can see  |
|
|
|
Post by darekdz on Feb 12, 2011 4:32:39 GMT -5
Picture attached Attachments:
|
|
ratmice
Emo VIPs 
I'm not an actor, but I play one on TV.
Posts: 1,853
|
Post by ratmice on Feb 12, 2011 7:29:42 GMT -5
Mine, also, does not quite match. Maybe different anodiizing companies.? Different dye lots? Not really noticeable unless the components are stacked (or you really look hard).
|
|
|
|
Post by wizardofoz on Feb 12, 2011 8:40:25 GMT -5
Another pic with a bunch of gear in a test  |
|
|
|
Post by darekdz on Feb 12, 2011 8:49:38 GMT -5
My components are stacked and I see big difference... I'm very disappointed... China...
wizardofoz -> yours is lighter, too...
what will be with next components? each of the new components in new colour?
|
|
stiehl11
Emo VIPs
Give me available light!
Posts: 7,261
|
Post by stiehl11 on Feb 12, 2011 10:35:01 GMT -5
My components are stacked and I see big difference... I'm very disappointed... China... wizardofoz -> yours is lighter, too... what will be with next components? each of the new components in new colour? You're not going to get Champaigne for beer money.  The pad print on my components are different shades and the intensity of the lights (lumens) are different between components. If that was more important to me than great sound at affordable (for my income) money then I know exactly where to go for a higher level of fit and finish. Quality Assurance/Control takes money; money that is directly passed on to the consumer in the cost of the product. For the price I paid for my gear I'll take my quality on the inside of the box rather than the outside, thank you very much.  |
|
ratmice
Emo VIPs
I'm not an actor, but I play one on TV.
Posts: 1,853
|
Post by ratmice on Feb 12, 2011 10:54:23 GMT -5
My components are stacked and I see big difference... I'm very disappointed... China... wizardofoz -> yours is lighter, too... what will be with next components? each of the new components in new colour? You're not going to get Champaigne for beer money. The pad print on my components are different shades and the intensity of the lights (lumens) are different between components. If that was more important to me than great sound at affordable (for my income) money then I know exactly where to go for a higher level of fit and finish. Quality Assurance/Control takes money; money that is directly passed on to the consumer in the cost of the product. For the price I paid for my gear I'll take my quality on the inside of the box rather than the outside, thank you very much. Every other faceplate matches. Why should we expect less of this one? |
|
|
|
Post by muzicianx on Feb 12, 2011 11:51:50 GMT -5
Maybe spray paint trim pieces bright orange, yellow, or pink, then that would distract the eye from the different hues of black.
It doesn't seem right that there should be fluctuations in those regards -- including the different hues of blue lights, or intensity. Seems like those things should just be a standard set of values...
|
|
|
|
Post by wizardofoz on Feb 12, 2011 12:31:31 GMT -5
I wonder if the new shipments coming in will be better...I'm not so distracted by it...in fact I didnt even notice it nor did several other people who are all Emo clients.
I am much more fussy about what's inside (granted I dont like the Al side strips and remove them along with the screws) but I have so much other gear that is not even black to worry too much about if one of my emo boxes is not 100% the same.
|
|
|
|
Post by moodyman on Feb 12, 2011 15:18:54 GMT -5
I wonder if the new shipments coming in will be better...I'm not so distracted by it...in fact I didnt even notice it nor did several other people who are all Emo clients. I am much more fussy about what's inside (granted I dont like the Al side strips and remove them along with the screws) but I have so much other gear that is not even black to worry too much about if one of my emo boxes is not 100% the same. I don't like the sidestrips either...but the the empty screw holes are worse. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2011 15:23:47 GMT -5
Jeeze that is off...... Sometimes at work we get different colors too. We just call the anodizers and whine. They fix it right away but not like we can do this. They said the reason for the different colors was how long it was dipped. The longer, the darker the black will look. Maybe since they were rushing to get them to the states they didn't dip them long enough.
Oh also the color can vary because they didn't mix the batch right or the voltage is off.
|
|
|
|
Post by CrazyBlue on Feb 12, 2011 15:41:40 GMT -5
Maybe spray paint trim pieces bright orange, yellow, or pink, then that would distract the eye from the different hues of black. Nah, just do some of kazoo's wood trim. That's my plan.  What? There's black? |
|
|
|
Post by darekdz on Feb 12, 2011 17:13:37 GMT -5
lighter black...
|
|
cawgijoe
Emo VIPs
"We made too many of the wrong mistakes." - Yogi Berra
Posts: 4,896
|
Post by cawgijoe on Feb 12, 2011 17:56:18 GMT -5
Doesn't bother me. I have different makes of equipment and everything is different. Emotiva gear is well-built. I do understand where people are coming from, but I certainly can live with it. The sound from the XDA-1 is spectacular.
|
|
|
|
Post by darekdz on Feb 13, 2011 4:50:30 GMT -5
Doesn't bother me. I have different makes of equipment and everything is different. Emotiva gear is well-built. I do understand where people are coming from, but I certainly can live with it. The sound from the XDA-1 is spectacular. You have right, but... colour of front panel - it is so simply.... only colour... |
|
|
|
Post by gearhead303 on Feb 13, 2011 11:08:13 GMT -5
|
|
|
|
Post by darekdz on Feb 13, 2011 11:42:45 GMT -5
Sorry... you are wrong... my problem is colour, only... the rest is PERFECT and I'm happy... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2011 12:51:17 GMT -5
The funny thing is that Gearhead didn't post anything but a link followed by about 50 lines of nothing. Gee, thanks Gearhead for that informative post - you really added a lot to this discussion...
-RW-
|
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,490
|
Post by LCSeminole on Feb 13, 2011 13:31:43 GMT -5
Yeah, I noticed all the excess space in that post, so I got rid of it.
|
|
The pad print on my components are different shades and the intensity of the lights (lumens) are different between components. If that was more important to me than great sound at affordable (for my income) money then I know exactly where to go for a higher level of fit and finish. 
