|
|
Post by svenake56 on Aug 21, 2013 1:25:31 GMT -5
I made this in acrylicglass, the intention was to make it look like floating in the air.
|
|
|
|
Post by svenake56 on Aug 21, 2013 1:33:13 GMT -5
This is how it looks the whole set. There has been som changes in the set since the picture was taken.![]()  
|
|
|
|
Post by svenake56 on Aug 21, 2013 1:39:44 GMT -5
Thank you arthurz, i found it by reading a little more on the helpside.  |
|
|
|
Post by gearhead2003 on Aug 21, 2013 4:03:39 GMT -5
Great addition to the setup, looks clean and sharp. What parts did you use for the wall mounting?
|
|
|
|
Post by svenake56 on Aug 21, 2013 6:31:57 GMT -5
Great addition to the setup, looks clean and sharp. What parts did you use for the wall mounting? I used parts from Elfa link and the acrylicglass bought on an auction very cheap, then i cut them out to the size and style i wanted. It cost me about $90 and a couple of hours work, a cheap stereorack. |
|
4Play
Minor Hero
Posts: 88 
|
Post by 4Play on Aug 21, 2013 17:10:15 GMT -5
Your rack is absolutely fabulous. You accomplished what you set out to do, it sure looks like it's floating.
Well done!!
|
|
|
|
Post by svenake56 on Aug 22, 2013 1:34:57 GMT -5
Your rack is absolutely fabulous. You accomplished what you set out to do, it sure looks like it's floating. Well done!! Thank you , i will update the picture when i get my DC-1 i have done some changings in the set. |
|
|
|
Post by flamingeye on Aug 22, 2013 9:00:44 GMT -5
WOW nice job , that was cheap acrylic is usually expensive especially when it's that thick
|
|
klinemj
Emo VIPs 
Official Emofest Scribe
Posts: 15,083
|
Post by klinemj on Aug 23, 2013 16:05:05 GMT -5
Very cool...nice look!
Mark
|
|
|
|
Post by Jean Genie on Aug 23, 2013 16:14:23 GMT -5
Sweet! How this IS that acrylic?
|
|
|
|
Post by svenake56 on Aug 27, 2013 1:40:20 GMT -5
|
|
emovac
Emo VIPs
Saeed al-Sahhaf
Posts: 2,456
|
Post by emovac on Aug 27, 2013 2:46:30 GMT -5
Nice concept. Since you are attached to the wall structure, do you notice any vibration issues at moderate or above volumes.
|
|
|
|
Post by svenake56 on Aug 27, 2013 6:00:23 GMT -5
Nice concept. Since you are attached to the wall structure, do you notice any vibration issues at moderate or above volumes. No there is absolutely no vibrations at all, the wall is made from gypsom a completely dead material. The speakers i move ( approx 1meter) from the wall when i play, and there is no vibration from the floor when you walk on it because it is mounted on the wall. |
|
[/b]
