sl1800
Seeker Of Truth
Posts: 3
|
Post by sl1800 on Nov 10, 2013 14:01:27 GMT -5
Does anyone have experience driving Martin Logan's with the XPR series amps? I just purchased a new pair of Martin Logan's the Summit X and I'm looking for a good amp to drive them with. The Summit X drops to 0.7 ohm at 20K, will the XPR-2 handle this load at that frequency? At the store they were driving the Summit's with McIntosh, I heard them with three different McIntosh amps and the best was the MC601 which is a pair of large mono blocks which cost the same as the speakers, and I just really can't put that much money into amps at his time. Any suggestions would be appreciated.
|
|
|
|
Post by novisnick on Nov 10, 2013 14:22:14 GMT -5
Does anyone have experience driving Martin Logan's with the XPR series amps? I just purchased a new pair of Martin Logan's the Summit X and I'm looking for a good amp to drive them with. The Summit X drops to 0.7 ohm at 20K, will the XPR-2 handle this load at that frequency? At the store they were driving the Summit's with McIntosh, I heard them with three different McIntosh amps and the best was the MC601 which is a pair of large mono blocks which cost the same as the speakers, and I just really can't put that much money into amps at his time. Any suggestions would be appreciated. IMHO, you need to sit , save , and be patient ! Did I say SAVE! Those big dogs need MONOBLOCKS ! Nuff said Peace, Nick |
|
|
|
Post by mg on Nov 10, 2013 14:30:10 GMT -5
Does anyone have experience driving Martin Logan's with the XPR series amps? I just purchased a new pair of Martin Logan's the Summit X and I'm looking for a good amp to drive them with. The Summit X drops to 0.7 ohm at 20K, will the XPR-2 handle this load at that frequency? At the store they were driving the Summit's with McIntosh, I heard them with three different McIntosh amps and the best was the MC601 which is a pair of large mono blocks which cost the same as the speakers, and I just really can't put that much money into amps at his time. Any suggestions would be appreciated. Hi!SL1800 While I don't own the Summits, I do have a pair of Vantages driven by a pair of XPR-1's and have been very pleased. You can not go wrong with the XPR-2 if you can swing your way to the 1's your in for a treat. While the Mc's are a thing of beauty I can't justify it's cost. Either way you XPR-2 or 1's I'm sure you will be very pleased. Noticed it's your first post welcome. |
|
|
|
Post by deltadube on Nov 10, 2013 17:45:41 GMT -5
Does anyone have experience driving Martin Logan's with the XPR series amps? I just purchased a new pair of Martin Logan's the Summit X and I'm looking for a good amp to drive them with. The Summit X drops to 0.7 ohm at 20K, will the XPR-2 handle this load at that frequency? At the store they were driving the Summit's with McIntosh, I heard them with three different McIntosh amps and the best was the MC601 which is a pair of large mono blocks which cost the same as the speakers, and I just really can't put that much money into amps at his time. Any suggestions would be appreciated. IMHO, you need to sit , save , and be patient ! Did I say SAVE! Those big dogs need MONOBLOCKS ! Nuff said Peace, Nick top dog xpr 1 mono blocks Nick ! |
|
