|
Post by brand on Jun 1, 2014 19:51:23 GMT -5
Find a lamp with an INCANDESCENT bulb; and plug it into another outlet on the same strip or device as your amp. Turn on the lamp. Play the amplifier as loudly as you would normally ever do. If the lamp dims noticeably when the music gets really loud, then you probably have a problem. If not, then don't worry about it. Don't expect the lamp to go out, but odds are, if the voltage is dropping enough to bother the amp, then you'll see the bulb waver. Thank you. I'll give the lamp test a try hehe
|
|
|
Post by lionear on Jun 3, 2014 20:56:25 GMT -5
Find a lamp with an INCANDESCENT bulb; and plug it into another outlet on the same strip or device as your amp. Turn on the lamp. Play the amplifier as loudly as you would normally ever do. If the lamp dims noticeably when the music gets really loud, then you probably have a problem. If not, then don't worry about it. Don't expect the lamp to go out, but odds are, if the voltage is dropping enough to bother the amp, then you'll see the bulb waver. Thank you. I'll give the lamp test a try hehe I'd say: If the system sounds off when the music gets really loud, then you probably have a problem. It might be the amp, or the power supply, the room or the speakers. If not, then don't worry about it. Don't use the lamp. Nelson Pass says an incandescent lamp acts as a power/voltage regulator - and I've used it in the past as a power filter. So you might be really changing things up with the lamp.
|
|
|
Post by Gary Cook on Jun 4, 2014 3:07:40 GMT -5
Thank you. I'll give the lamp test a try hehe I'd say: If the system sounds off when the music gets really loud, then you probably have a problem. It might be the amp, or the power supply, the room or the speakers. If not, then don't worry about it. Don't use the lamp. Nelson Pass says an incandescent lamp acts as a power/voltage regulator - and I've used it in the past as a power filter. So you might be really changing things up with the lamp. I've used the light bulb test before, it works, noticeable dimming = dedicated circuit required. Note that it's for a quick voltage drop test (not a sound check) and I don't leave it there. Cheers Gary
|
|
|
Post by hcsunshine90 on Jun 11, 2014 21:30:23 GMT -5
hey y'all doin. i just want to tell you about my experience with my UPA-1's. i'm not sayin anybody is right or wrong here, but mine took like a week or two till there was the bass that i finally have now. there was hardly any bass at all upon first power up. now mind you i only played them for a couple few hours a day, so if you played them constantly for a day or so, one could have got the same result for burn in. i stuck with it though, i knew they would eventually burn in, i trusted in emotiva. but hey folks, here's at least one person where burn in was a real thing for sure, no doubt about it. so think what you want.
|
|
hemster
Global Moderator
Particle Manufacturer
...still listening... still watching
Posts: 51,951
|
Post by hemster on Jun 11, 2014 21:37:06 GMT -5
^Looks like in some cases, all that burn-in causes a lack of capitalization!
|
|
|
Post by Gary Cook on Jun 11, 2014 22:18:35 GMT -5
hey y'all doin. i just want to tell you about my experience with my UPA-1's. i'm not sayin anybody is right or wrong here, but mine took like a week or two till there was the bass that i finally have now. there was hardly any bass at all upon first power up. now mind you i only played them for a couple few hours a day, so if you played them constantly for a day or so, one could have got the same result for burn in. i stuck with it though, i knew they would eventually burn in, i trusted in emotiva. but hey folks, here's at least one person where burn in was a real thing for sure, no doubt about it. so think what you want. I use an XPA-100 (a close relative of the UPA-1) as a sub woofer amp, it would have been a bit scary if it had no bass for a week or 2. Cheers Gary
|
|
|
Post by hcsunshine90 on Jun 11, 2014 22:38:34 GMT -5
yikes that WOULD be bad! cheers gary
|
|