dvzzz
Seeker Of Truth
Posts: 4
|
Post by dvzzz on Nov 27, 2014 19:38:12 GMT -5
I am looking for help with Sherbourn PA 2-50, is it possible to send signal from Input 1 to either Speakers A or Speakers B? Can IR remote control the selection A or B? Thanks for your help! Happy holiday.
|
|
|
Post by vcautokid on Nov 27, 2014 21:55:01 GMT -5
The IR remote will not allow switching between A and B speaker pair. Only your source input, volume level etc. You would be running the same speaker output from the line source fed into the PA-250, whether that would be speaker A only, or speaker B only, or both at the same time at least as the operators manual would have shown me here. Hope this helps. cdn.shopify.com/s/files/1/0172/4516/t/3/assets/sherbourn_PA_2-50_owners_manual.pdf
|
|
dvzzz
Seeker Of Truth
Posts: 4
|
Post by dvzzz on Nov 27, 2014 23:19:47 GMT -5
Thank you. The IR remote will not allow switching between A and B speaker pair. Only your source input, volume level etc. You would be running the same speaker output from the line source fed into the PA-250, whether that would be speaker A only, or speaker B only, or both at the same time at least as the operators manual would have shown me here. Hope this helps. cdn.shopify.com/s/files/1/0172/4516/t/3/assets/sherbourn_PA_2-50_owners_manual.pdf
|
|
dvzzz
Seeker Of Truth
Posts: 4
|
Post by dvzzz on Nov 27, 2014 23:34:56 GMT -5
I just through the manual it looks like speaker outputs are not selectable at all, there is now way to select A vs. B at all. That is a major bummer for me. Was so hoping that I can select speaker outputs together with input at least. I am looking for help with Sherbourn PA 2-50, is it possible to send signal from Input 1 to either Speakers A or Speakers B? Can IR remote control the selection A or B? Thanks for your help! Happy holiday.
|
|
|
Post by brubacca on Nov 28, 2014 7:15:56 GMT -5
I own this amp. Both speaker outputs are always active. No possible way to switch the,.
This little amp sounds great.
|
|