|
|
Post by irishc6 on May 28, 2015 20:26:56 GMT -5
I have 3 UPA-1's powering my mains and center channel. Today I noticed even when the UPA-1 that is powering the CC is in standby mode, I still have sound coming from the speaker. Any ideas what would cause this?
|
|
|
|
Post by jlafrenz on May 28, 2015 21:23:58 GMT -5
This sounds like a call to tech support as they will likely need to take a look at the amp. One thing you might try is using that amp on a different channel and verify that the issue follows the amp and not any other components in the setup.
|
|
|
|
Post by Gary Cook on May 28, 2015 22:20:51 GMT -5
How loud?
Cheers
Gary
|
|
|
|
Post by irishc6 on May 29, 2015 8:21:22 GMT -5
This sounds like a call to tech support as they will likely need to take a look at the amp. One thing you might try is using that amp on a different channel and verify that the issue follows the amp and not any other components in the setup. I will definitely give that a shot tonight. Thank you for the suggestion. It seems to be full power. There isn't a noticeable audible difference between standby mode and power on. And when I turn the amp off and on it makes the same audible clicking noise as my other 2 amps as if things internally are switching off and on, but the sound just keeps coming. Whenever I hit the main power on the back of the amp the sound stops. |
|
