|
|
Post by gfaulk on Jul 9, 2016 9:26:49 GMT -5
The video output from my UMC 200 has started to flicker on and off. The video source is a Verizon/Motorolo QIP 7100 HD video box. Changing HDMI cables had no effect. I also substituted a different cable box with no improvement. Any suggestions?
Thanks in advance.
Gary |
|
|
|
Post by wiskers on Jul 9, 2016 10:39:01 GMT -5
Try turning you cable box off then on, let it reload and see how it works.
|
|
|
|
Post by gfaulk on Jul 9, 2016 17:13:08 GMT -5
Thanks for the help, Wiskers. At fist, rebooting the cable box helped. Unfortunately, the flickering started after about 20 minutes. I tested all three of my cable boxes with my two Onkyo receivers. I have no video issues when routing the cable boxes through my receivers.
Gary |
|
|
|
Post by wiskers on Jul 9, 2016 17:37:53 GMT -5
Try a different hdmi slot on umc-200.
Try a reset on the umc-200
If none of above work might be time to call for service.
|
|
|
|
Post by cwt on Jul 10, 2016 2:07:09 GMT -5
Nothing to lose last resort if its an edid comms issue to hook up a sp/dif coax or optical audio cable before it needs servicing Gary  Different hdmi port as wiskers said will rule out skewed pins etc |
|
|
|
Post by gfaulk on Jul 10, 2016 13:04:32 GMT -5
After trying everything, I tried one more set of HDMI cables. I used the cables that came with my OPPO 103 and incredibly, that seems to have solved the problem. The other cables I tried were ones that came with the cable box, some RCA branded cables from Walmart, and an unknown brand from Fry's. I have used the system about six hours now with no problems.
Thanks again for the help and suggestions.
Gary |
|
