|
|
Post by zcars74 on Aug 7, 2016 19:28:34 GMT -5
For some reason my UMC-200 requires 2 or sometimes 3 restarts to handshake other hardware.. Anyone else having this issue? Tried new hdmi cables and different input on the TV and still have the same issue..
I believe it's the UMC-200 because I don't get any sound from the directv box until it handshakes with the TV for picture...
I have updated to the latest Firmware.
|
|
|
|
Post by Gary Cook on Aug 7, 2016 19:50:20 GMT -5
I also don't get any sound from the cable box until the UMC-200 handshakes with the TV for picture. This only started happening when I updated to a new (IQ3) cable box, doesn't happen with the old (IQ2) cable box. There is a later version of HDCP in the IQ3 so my guess is that's what is causing the change.
Cheers
Gary
|
|
|
|
Post by zcars74 on Aug 7, 2016 20:16:47 GMT -5
It's happening with all other devices connected to it as well. Started about 3 months ago.
|
|
|
|
Post by Gary Cook on Aug 7, 2016 20:23:06 GMT -5
I can't say whether it happens or not with other sources, the default turn on sequence is panel, UMC-200, cable box. If I switch to another source (eg; blu ray or ATV) the handshaking has already occurred. I'll give another source a try when I get home tonight. Thinking about it, I did do a panel software update around the same time as the new cable box, so it might be that.
Cheers
Gary
|
|
|
|
Post by bolle on Aug 8, 2016 3:51:04 GMT -5
Depends on the whole chain. I have one of the first UMC-200s to be shipped still running. I never had any HDMI handshake issues with quite a lot of different devices (4 different HTPCs, PS3, PS4, 2 BluRay-Players, Cablebox, FireTV Box) so far with one exception: Everything built by Pioneer... Both of my DVD-Players (668, 989) as well as one of the BluRay-players I had sometimes have Problems to establish a handshake.
For the 989 currently in the System I solved this with a specific order in which to Switch the devices on.
I think this is perfectly normal with HDMI that now and then you get some incompatibilites between devices.
|
|
|
|
Post by zcars74 on Aug 8, 2016 10:24:17 GMT -5
I also noticed that I'm getting a USB mismatch error at startup from time to time... I don't have anything plugged into the usb port.. I'm thinking about starting a ticket for RMA repair..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 8, 2016 15:29:10 GMT -5
I also get intermittent handshaking issues with the DTV Genie. Sometimes when changing channels (or sources then back to DTV), the screen color is PINK.
I tried different cables with no success. I just change the channel, then back and it usually corrects it.
|
|
|
|
Post by zcars74 on Aug 12, 2016 15:16:14 GMT -5
So I contacted emotive support and I explained the issue that I was having and they approved the repair instantly...
|
|
|
|
Post by dvsmusic on Aug 13, 2016 9:10:54 GMT -5
My UMC-200 just started having a similar issue this week. Now it won't handshake with any source. I tried replacing cables and resetting the UMC. That didn't work, but I'll continue troubleshooting tonight after work. Looks like a call to Emotiva CS is in my future  |
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,850
|
Post by LCSeminole on Aug 13, 2016 11:10:30 GMT -5
So I contacted emotive support and I explained the issue that I was having and they approved the repair instantly... Did Emotiva Tech Support say what the problem with you UMC-200 is? What is the power supply? Just curious. |
|
