|
|
Post by brucemck2 on Jul 16, 2017 9:20:06 GMT -5
Is there a hidden file that can be hand edited to change the implemented delay for two subs? If so I can omit an extra box from my signal chain (distances need to be tweaked for proper sub/main alignment)
|
|
|
|
Post by pedrocols on Jul 16, 2017 12:03:35 GMT -5
I thought all you needed to do for that was to set the phase.
|
|
|
|
Post by 405x5 on Jul 16, 2017 12:49:57 GMT -5
Is there a hidden file that can be hand edited to change the implemented delay for two subs? If so I can omit an extra box from my signal chain (distances need to be tweaked for proper sub/main alignment) At 115 lbs, I "edit" my subwoofer distance with a folding hand truck (courtesy Sears) Bill |
|
|
|
Post by socketman on Jul 16, 2017 13:35:10 GMT -5
Is there a hidden file that can be hand edited to change the implemented delay for two subs? If so I can omit an extra box from my signal chain (distances need to be tweaked for proper sub/main alignment) If you are using a minidsp such as the 2x4 and feel there is a noticeable difference when using it them i would say continue to do so. I used the mindsp but since my subs were not really that far from my mains it didnt seem to make much of a difference. If i ever add rear subs i may incorporate it at that time. If your subs have adjustable phase delay not just a 90/0 switch then that can be used to compensate. Ansat started a thread on here and he explains all of it quite well , IRC he showed how to edit the local dirac file but im a bit fuzzy on that so i would suggest you search for threads by Ansat. |
|
DYohn
Emo VIPs 
Posts: 18,348
|
Post by DYohn on Jul 16, 2017 13:50:21 GMT -5
Is there a hidden file that can be hand edited to change the implemented delay for two subs? If so I can omit an extra box from my signal chain (distances need to be tweaked for proper sub/main alignment) For what controller? |
|
|
|
Post by socketman on Jul 16, 2017 14:30:17 GMT -5
Since this thread is in the Dirac live area of the forum i would assume the OP wants to edit the XML ? to adjust distances for his subs. But then as they say never assume anything.
|
|
|
|
Post by foggy1956 on Jul 16, 2017 15:07:38 GMT -5
Is there a hidden file that can be hand edited to change the implemented delay for two subs? If so I can omit an extra box from my signal chain (distances need to be tweaked for proper sub/main alignment) If you are using a minidsp such as the 2x4 and feel there is a noticeable difference when using it them i would say continue to do so. I used the mindsp but since my subs were not really that far from my mains it didnt seem to make much of a difference. If i ever add rear subs i may incorporate it at that time. If your subs have adjustable phase delay not just a 90/0 switch then that can be used to compensate. Ansat started a thread on here and he explains all of it quite well , IRC he showed how to edit the local dirac file but im a bit fuzzy on that so i would suggest you search for threads by Ansat. I believe the file Ansat was editing was for a house curve, I don't believe distances are available to edit as much of what dirac does occurs in the time domain, once again, could be wrong😎 |
|
geebo
Emo VIPs
"Too bad that all the people who know how to run the country are driving taxicabs and cutting hair"
Posts: 24,188
Member is Online
|
Post by geebo on Jul 16, 2017 15:10:00 GMT -5
Dirac distances/delays cannot be changed.
|
|
|
|
Post by socketman on Jul 16, 2017 17:17:33 GMT -5
If you are using a minidsp such as the 2x4 and feel there is a noticeable difference when using it them i would say continue to do so. I used the mindsp but since my subs were not really that far from my mains it didnt seem to make much of a difference. If i ever add rear subs i may incorporate it at that time. If your subs have adjustable phase delay not just a 90/0 switch then that can be used to compensate. Ansat started a thread on here and he explains all of it quite well , IRC he showed how to edit the local dirac file but im a bit fuzzy on that so i would suggest you search for threads by Ansat. I believe the file Ansat was editing was for a house curve, I don't believe distances are available to edit as much of what dirac does occurs in the time domain, once again, could be wrong😎 Sounds about right |
|
