|
|
Post by jonas79 on Jul 18, 2017 13:43:11 GMT -5
I have order a BasX 700 unit and i hope on help to do a first installation correctly.
Im thinking of manual installation without the Mic.
What Db should it be when i Tone in all Channels ?
I Will use a optical to the tv for Netflix and then Hdmi for a 4K Bluray player, Ps4 Pro and My Cable box.
|
|
|
|
Post by jonas79 on Jul 20, 2017 6:43:22 GMT -5
Tested the unit yesterday and have some question.
Test Tone to get right level on 75 DB on all Channels are depending of the volume in the processer why ? Should never be so.
Can not select a startup volume Always same as last volume in the unit.
When i switch Channels on my satbox i can get a Noice in right frontspeaker some Times never heard that om my Marantz Av 7005 that i switch out.
|
|
|
|
Post by 405x5 on Jul 20, 2017 7:48:00 GMT -5
I have order a BasX 700 unit and i hope on help to do a first installation correctly. Im thinking of manual installation without the Mic. What Db should it be when i Tone in all Channels ? I Will use a optical to the tv for Netflix and then Hdmi for a 4K Bluray player, Ps4 Pro and My Cable box. If you've got a 4K player, the Netflix App. Will run with no need for an optical connection to your monitor. |
|
|
|
Post by mshump on Jul 20, 2017 12:14:13 GMT -5
Tested the unit yesterday and have some question. Test Tone to get right level on 75 DB on all Channels are depending of the volume in the processor why ? Should never be so. Your incorrect on this You are level matching the outputs to be even at volume. This unit doesnt put out a pink noise at a predetermined level like some other units. It puts it out and then you set the volume and then do the internal level matching on the speakers. So in essence you are doing the same thing
Can not select a startup volume Always same as last volume in the unit. I looked through the manual and I don't see this option available
When i switch Channels on my satbox i can get a Noice in right frontspeaker some Times never heard that om my Marantz Av 7005 that i switch out. It is most likely a noise coming from the SAT box. The Marrantz may have had a Quicker silence on the HDMI input. Mark |
|
|
|
Post by jonas79 on Aug 4, 2017 1:13:11 GMT -5
Tested the unit yesterday and have some question. Test Tone to get right level on 75 DB on all Channels are depending of the volume in the processor why ? Should never be so. Your incorrect on this You are level matching the outputs to be even at volume. This unit doesnt put out a pink noise at a predetermined level like some other units. It puts it out and then you set the volume and then do the internal level matching on the speakers. So in essence you are doing the same thing
Can not select a startup volume Always same as last volume in the unit. I looked through the manual and I don't see this option available
When i switch Channels on my satbox i can get a Noice in right frontspeaker some Times never heard that om my Marantz Av 7005 that i switch out. It is most likely a noise coming from the SAT box. The Marrantz may have had a Quicker silence on the HDMI input. Mark Yes i have a Samsung UBD-K8500 in Sweden. It have Netflix app but its so slow. Maybe i try it after updates later. New beta driver 2.9.2 driver solved my problem with pitchure from PS4 Pro and Samsung Uhd player. But i still have the noice in speakers when Switch Channels on my satbox and it depends in different audio codecs on the Channels. I have Used All Stereo and Flat in -25 DB to level in the speakers on 75 DB on all Speakers. What is the recomomendations to get best results ? Offcourse i have messured the lenght to the speakers and get this results into the unit. But i dont understand the EQ 11 band settings yet. |
|
|
|
Post by kevinc25 on Aug 4, 2017 8:57:15 GMT -5
jonas79: For me, the unit sounded pretty poor until I ran EmoQ. The results from EmoQ do not look very like the results I had when I previously ran room correction software in Foobar, but sound excellent. I would give EmoQ a try and see what you think of the results before going much further - I don't think you are getting the best out of it yet. |
|
|
|
Post by jonas79 on Aug 5, 2017 12:19:41 GMT -5
jonas79: For me, the unit sounded pretty poor until I ran EmoQ. The results from EmoQ do not look very like the results I had when I previously ran room correction software in Foobar, but sound excellent. I would give EmoQ a try and see what you think of the results before going much further - I don't think you are getting the best out of it yet. I will try this out later. But i like that flat and clean sound out of the box. |
|
|
|
Post by Gary Cook on Aug 5, 2017 19:06:51 GMT -5
But i still have the noice in speakers when Switch Channels on my satbox and it depends in different audio codecs on the Channels. Cable and satellite boxes are the worst for HDMI/HDCP handshaking issues and inn my experience ist never the processor problem. I'd suggesting talking to your satellite box supplier and asking for an updated box, to the current HDMI/HDCP standards. The easiest fix it use a toslink or RCA digital connection between the cable/satellite box that avoids the conflicts in the HDMI/HDCP connection. Cheers Gary |
|
