|
|
Post by wpl on Dec 10, 2017 1:56:46 GMT -5
hello emo community
how many ampere minimum power do you need 2 XPA-1 Gen2 monos?
I go in front of the fuse box over AHP sound module III G fuse 16 / 20amp ( sorry have 230 v )
Is 1 direct line enough + 1 fuse? or do i need 2 lines + 2 fuses?
best regards peter thailand
|
|
KeithL
Administrator 
Posts: 10,261
|
Post by KeithL on Dec 10, 2017 2:03:47 GMT -5
While a pair of XPA-1's will certainly draw a lot more power under lab test conditions..... We have plenty of people playing music, running a pair of them, on a single 20 amp circuit, with no problem. (I'm assuming you're talking about 115 VAC service here... the current requirement is halved at 230 VAC.) hello emo community how many ampere minimum power do you need 2 XPA-1 Gen2 monos? I go in front of the fuse box over AHP sound module III G fuse 16 / 20amp Is 1 direct line enough + 1 fuse? or do i need 2 lines + 2 fuses? best regards peter thailand |
|
|
|
Post by wpl on Dec 10, 2017 2:40:31 GMT -5
While a pair of XPA-1's will certainly draw a lot more power under lab test conditions..... We have plenty of people playing music, running a pair of them, on a single 20 amp circuit, with no problem. (I'm assuming you're talking about 115 VAC service here... the current requirement is halved at 230 VAC.) hello emo community how many ampere minimum power do you need 2 XPA-1 Gen2 monos? I go in front of the fuse box over AHP sound module III G fuse 16 / 20amp Is 1 direct line enough + 1 fuse? or do i need 2 lines + 2 fuses? best regards peter thailand many thanks for your response do I understand it right ? then would be 1 x 16 ampere line at 230v enough? |
|
|
|
Post by pknaz on Dec 10, 2017 3:42:27 GMT -5
This question is very difficult to answer, and the answer will be different for everyone. I run two XPA-1's (Gen1) and an XPA-7 (Gen2) plus many many many more things on 30amps @ 110VAC (2 x 15amp) and I have no issues.
|
|
|
|
Post by mgbpuff on Dec 10, 2017 8:46:42 GMT -5
I think the OP said he has 230v. If that's the case, he will absolutely have no problem on one circuit.
|
|
|
|
Post by wpl on Dec 10, 2017 10:41:26 GMT -5
many thanks for the help
best regards from thailand peter
|
|
