ttocs
Global Moderator 
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,166
|
Post by ttocs on Jun 15, 2018 14:12:05 GMT -5
Great update Lonnie!
|
|
|
|
Post by 405x5 on Jun 15, 2018 14:32:36 GMT -5
Looking forward to hearing from the first group of self installers.
With a bit of luck, my existing flat screen will hold out until then.
Bill
|
|
|
|
Post by macromicroman on Jun 15, 2018 14:37:52 GMT -5
Happy Days are here Again.
|
|
|
|
Post by socketman on Jun 15, 2018 14:41:39 GMT -5
Anyone here have a pic of the back of the Gen 3 XMC1. I am making my XLR cables need to see the layout. Let me know whats your total cost to make the cables. I was thinking the same thing. I bought everything at AVShop.ca was like $130 for neutric ends and 30ft of canare cable. I will be making 6 cables all together. |
|
bootman
Emo VIPs 
Typing useless posts on internet forums....
Posts: 9,358
|
Post by bootman on Jun 15, 2018 15:19:33 GMT -5
Are we getting Emotiva branded USBs with the new code thrown in as a bonus? Actually a link on the site now so we can upgrade will do.  Have a great weekend everyone. |
|
|
|
Post by Gary Cook on Jun 15, 2018 16:37:26 GMT -5
Quick update here. The V3 code is done, vetted, approved for release. Production is updating the XMC's that are in house as well as preparing the self install kits for shipping on Monday or Tuesday of next week. Have a great weekend everyone. Lonnie I wonder how many XMC-1's there are visiting home base in downtown Franklin? And how long does it take to turn around each unit? And how many production people are there? If they can turn mine around in a week, then 4/5 days to get here, it might make it before 1st July and avoid the tax hike. Fingers crossed  Cheers Gary |
|
|
|
Post by socketman on Jun 15, 2018 17:05:01 GMT -5
Quick update here. The V3 code is done, vetted, approved for release. Production is updating the XMC's that are in house as well as preparing the self install kits for shipping on Monday or Tuesday of next week. Have a great weekend everyone. Lonnie I wonder how many XMC-1's there are visiting home base in downtown Franklin? And how long does it take to turn around each unit? And how many production people are there? If they can turn mine around in a week, then 4/5 days to get here, it might make it before 1st July and avoid the tax hike. Fingers crossed Cheers Gary Pay the new tax hike Gary, its to help the New Australian's inttegrate and be able to purchase all the new electronics they need to help them adjust. |
|
|
|
Post by Gary Cook on Jun 15, 2018 17:08:30 GMT -5
I wonder how many XMC-1's there are visiting home base in downtown Franklin? And how long does it take to turn around each unit? And how many production people are there? If they can turn mine around in a week, then 4/5 days to get here, it might make it before 1st July and avoid the tax hike. Fingers crossed Pay the new tax hike Gary, its to help the New Australian's inttegrate and be able to purchase all the new electronics they need to help them adjust. I already pay more than enough, I'm firmly in the Kerry Packer school of tax payment. "As a government I can tell you you're not spending it that well that we should be paying extra." Cheers Gary |
|
|
|
Post by suffolk112000 on Jun 15, 2018 17:13:53 GMT -5
Quick update here. The V3 code is done, vetted, approved for release. Production is updating the XMC's that are in house as well as preparing the self install kits for shipping on Monday or Tuesday of next week. Have a great weekend everyone. Lonnie Wow...! Thanks for taking the time to update the forum bbefore heading off for the weekend Lonnie...!!! It'll make this weekend truly awesome for all of us. I've never owned an XMC-1 and can't wait to put Dirac thru its paces. |
|
|
|
Post by andyman on Jun 15, 2018 17:15:51 GMT -5
Hi Gary
I remember hearing there were 11 in the shop for the board.
|
|
|
|
Post by Gary Cook on Jun 15, 2018 17:19:22 GMT -5
Hi Gary I remember hearing there were 11 in the shop for the board. OK then, thanks for that, should be a good chance mine will be done in less than a week  Cheers Gary |
|
ttocs
Global Moderator
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,166
|
Post by ttocs on Jun 15, 2018 18:34:08 GMT -5
So, for the self-install is the price for the V3 board $399? I'm not sure where the price finally landed.
|
|
|
|
Post by geebo on Jun 15, 2018 19:26:48 GMT -5
So, for the self-install is the price for the V3 board $399? I'm not sure where the price finally landed. $399 plus shipping. Add sales tax if you're in Tennessee. |
|
|
|
Post by wilburthegoose on Jun 15, 2018 19:53:25 GMT -5
How do we place an order? I didn’t see anything on the Emotiva website.
|
|
|
|
Post by number8 on Jun 15, 2018 20:00:18 GMT -5
How do we place an order? I didn’t see anything on the Emotiva website. I sent an email to sales@emotiva.com to get a quote |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,033
|
Post by cawgijoe on Jun 15, 2018 21:44:58 GMT -5
How do we place an order? I didn’t see anything on the Emotiva website. I was told they would reach out to me. I will probably call on Monday instead of waiting. |
|
|
|
Post by donh50 on Jun 15, 2018 22:34:07 GMT -5
Quick update here. The V3 code is done, vetted, approved for release. Production is updating the XMC's that are in house as well as preparing the self install kits for shipping on Monday or Tuesday of next week. Have a great weekend everyone. Lonnie Awesome, thank you, here's hoping shipping goes smoothly (sure I am near the back of the line since I just got around to actually paying)! Re. ordering -- you have to send an email or call Emotiva. I did, and they sent me an invoice, which I then paid. They charged my card right away, not after it ships, so make sure you are prepared to pay. $399 + $25 shipping so $424 USD to me in CO. |
|
|
|
Post by zarthaz on Jun 15, 2018 23:58:08 GMT -5
Excellent news, been looking forward to this update and making the Home Theater a bit more friendly in regards to using 4K and HDR.
Mailed sales for a quote to Australia for self install.
Cheers
Z
|
|
|
|
Post by novisnick on Jun 16, 2018 0:15:59 GMT -5
Quick update here. The V3 code is done, vetted, approved for release. Production is updating the XMC's that are in house as well as preparing the self install kits for shipping on Monday or Tuesday of next week. Have a great weekend everyone. Lonnie  |
|
|
|
Post by fritz on Jun 16, 2018 7:29:27 GMT -5
I still don't see any links to order or pricing for the home install board. Anyone know of a link?
|
|
