Mc 700 and oppo 105 problems

[frisco]

 I think I must be missing  something obvious here. My system with an mc 700 and oppo 105 was working fine until I had to disassemble to allow for a home repair. Now I can’t get Audio and video over hdmi from the oppo to the mc700. The cable box works fine on the mc700 on hdmi input 6. The oppo works fine direct to my tv via hdmi. but I  cant get any  av between oppo and mc 700 on ports 2 4 or 5.ive also tried three different hdmi cords and oppos hdmi setting is set to split screen.


any thoughts about what I am missing.

[novisnick]

Swap the two Oppo HDMI cable connections

[frisco]

Alas I swapped hdmi slots in the oppo. the hdmi connection to the tv is still fine; no handshake between the oppo and the mc700 still. 

[adaboy]

Bench mc700 and go get a real pre or receiver that works.

[cwt]

I would start by using hdmi 1 out rather than split frisco just to simplify things . If that doesn't work try switching colour spaces; bit depth and type of component signal;

HDMI Options
Color Space(HDMI1) [ Auto | RGB Video Level | RGB PC Level | YCbCr 4:4:4 | YCbCr 4:2:2 ]
Color Space(HDMI2) [ Auto | RGB Video Level | RGB PC Level | YCbCr 4:4:4 | YCbCr 4:2:2 ]
Deep Color(HDMI1) [ 36 Bits | 30 Bits (dithered) | 30 Bits | Off (dithered) | Off ]
Deep Color(HDMI2) [ 36 Bits | 30 Bits (dithered) | 30 Bits | Off (dithered) | Off ]

Also try the 105's 4k upscaling

Output Resolution [ 4Kx2K | Auto | 1080p | 1080i | 720p | 480p/576p | 480i/576i | Source Direct ]

and bitstream/decode options

HDMI Audio [ Auto | LPCM | Bitstream | Off ]

All worth a try considering the differing hdmi versions of the 700