|
|
Post by creimes on Dec 6, 2018 14:03:13 GMT -5
Does anyone here know if the option to display the current codec on the XMC-1 display is still an option, I can't find it anywhere on my buddies XMC-1 running the latest firmware as we installed the 4K board in his. I'm talking about this display setting here  |
|
|
|
Post by geebo on Dec 6, 2018 16:00:12 GMT -5
Does anyone here know if the option to display the current codec on the XMC-1 display is still an option, I can't find it anywhere on my buddies XMC-1 running the latest firmware as we installed the 4K board in his. I'm talking about this display setting here I don't know off the top of my head how to select it but the option is there because I have it working on my XMC. Somewhere in the setup under advanced or preferences I think. It wasn't available with the earlier 4K firmwares but came back in version 5.3 and later. |
|
|
|
Post by creimes on Dec 6, 2018 16:10:32 GMT -5
Does anyone here know if the option to display the current codec on the XMC-1 display is still an option, I can't find it anywhere on my buddies XMC-1 running the latest firmware as we installed the 4K board in his. I'm talking about this display setting here I don't know off the top of my head how to select it but the option is there because I have it working on my XMC. Somewhere in the setup under advanced or preferences I think. It wasn't available with the earlier 4K firmwares but came back in version 5.3 and later. I scoured that menu and couldn't find anything haha, I'll see him this weekend as he will have my XMC-1 that he's picking up at the border for me so I'll see what firmware he has, pretty sure he has the latest but I could be wrong, he really likes that setting as do I  |
|
|
|
Post by geebo on Dec 6, 2018 16:14:22 GMT -5
I don't know off the top of my head how to select it but the option is there because I have it working on my XMC. Somewhere in the setup under advanced or preferences I think. It wasn't available with the earlier 4K firmwares but came back in version 5.3 and later. I scoured that menu and couldn't find anything haha, I'll see him this weekend as he will have my XMC-1 that he's picking up at the border for me so I'll see what firmware he has, pretty sure he has the latest but I could be wrong, he really likes that setting as do I If you don't get an answer by tonight I will find it and post back here. |
|
|
|
Post by geebo on Dec 6, 2018 19:54:44 GMT -5
I don't know off the top of my head how to select it but the option is there because I have it working on my XMC. Somewhere in the setup under advanced or preferences I think. It wasn't available with the earlier 4K firmwares but came back in version 5.3 and later. I scoured that menu and couldn't find anything haha, I'll see him this weekend as he will have my XMC-1 that he's picking up at the border for me so I'll see what firmware he has, pretty sure he has the latest but I could be wrong, he really likes that setting as do I Okay, here it is: Menu > Setup > Preferences > Status Display > You can choose from Surround Mode, Volume, Bitstream, None, Full Status and Input. |
|
|
|
Post by creimes on Dec 6, 2018 20:47:16 GMT -5
I scoured that menu and couldn't find anything haha, I'll see him this weekend as he will have my XMC-1 that he's picking up at the border for me so I'll see what firmware he has, pretty sure he has the latest but I could be wrong, he really likes that setting as do I Okay, here it is: Menu > Setup > Preferences > Status Display > You can choose from Surround Mode, Volume, Bitstream, None, Full Status and Input. Awesome thanks, I will check it out at my buddies this weekend, not sure if I missed it or what or he doesn't have the firmware that it came back in ?? |
|
|
|
Post by creimes on Dec 8, 2018 0:50:14 GMT -5
I scoured that menu and couldn't find anything haha, I'll see him this weekend as he will have my XMC-1 that he's picking up at the border for me so I'll see what firmware he has, pretty sure he has the latest but I could be wrong, he really likes that setting as do I Okay, here it is: Menu > Setup > Preferences > Status Display > You can choose from Surround Mode, Volume, Bitstream, None, Full Status and Input. Updated his XMC to 5.3 and it's all good, we still had the firmware from installing the 4K board, thanks again Geeb Chad |
|
|
|
Post by geebo on Dec 8, 2018 10:30:52 GMT -5
Okay, here it is: Menu > Setup > Preferences > Status Display > You can choose from Surround Mode, Volume, Bitstream, None, Full Status and Input. Updated his XMC to 5.3 and it's all good, we still had the firmware from installing the 4K board, thanks again Gar Chad Gar???  Now you have 5.4 available and it's highly recommended. |
|
|
|
Post by doc1963 on Dec 8, 2018 10:56:17 GMT -5
Okay, here it is: Menu > Setup > Preferences > Status Display > You can choose from Surround Mode, Volume, Bitstream, None, Full Status and Input. Updated his XMC to 5.3 and it's all good, we still had the firmware from installing the 4K board, thanks again Gar Chad I agree with geebo ... Go straight to 5.4. It’s the most “solid” build yet if you’re using the new HDMI 2.0b video board. I’ve been running the beta for the past two weeks and haven’t enjoyed my XMC-1 more since before installing the new 4K board. |
|
|
|
Post by creimes on Dec 8, 2018 11:38:49 GMT -5
Updated his XMC to 5.3 and it's all good, we still had the firmware from installing the 4K board, thanks again Gar Chad Gar??? Now you have 5.4 available and it's highly recommended. Corrected, I get you and Garbulky mixed up all the time hahaha, plus I had a few bevvies last night and it was late and my head was spinning lol Funny thing, I brought my laptop with me to download the update and put it on a flash drive as he isn't very good at that sort of thing, an hour after we did the update to 5.3 I logged onto the forum here and seen Keith's 5.4 firmware thread lol, my buddy and I had a good laugh that we had to do the process all over again haha. Chad |
|
|
|
Post by creimes on Dec 8, 2018 11:39:32 GMT -5
Updated his XMC to 5.3 and it's all good, we still had the firmware from installing the 4K board, thanks again Gar Chad I agree with geebo ... Go straight to 5.4. It’s the most “solid” build yet if you’re using the new HDMI 2.0b video board. I’ve been running the beta for the past two weeks and haven’t enjoyed my XMC-1 more since before installing the new 4K board. See my post above lol ^^^^^^ |
|
