|
|
Post by evergreek on Feb 7, 2019 16:34:49 GMT -5
All,
Im confused in regards to how I should wire the PT-100 and my GE Tritons 3s.
1. Should I use the LFE connection from each speaker powered sub to the individual SUB OUTS or utilize a splitter and connect to one of the sub outs on the PT100?
2. Are the regular stereo outs FULL range? (thus not needing the LFE connections)?
Anyone with a similar setup? Would appreciate any guidance with this.
evergreek
|
|
|
|
Post by emotivate on Feb 8, 2019 14:38:54 GMT -5
Golden Ear will recommend just using the speaker wires to the speaker input terminals to your Tritons and let the built in DSP and crossover do the subwoofer management. You will need to run the PT 100's speaker output as large speakers, or you won't get the LFE signal to the Tritons. Simpler and less signal loss from using a splitter and no extra cables to buy or hide.
|
|
|
|
Post by evergreek on Feb 8, 2019 16:38:02 GMT -5
Golden Ear will recommend just using the speaker wires to the speaker input terminals to your Tritons and let the built in DSP and crossover do the subwoofer management. You will need to run the PT 100's speaker output as large speakers, or you won't get the LFE signal to the Tritons. Simpler and less signal loss from using a splitter and no extra cables to buy or hide. Thanks for the reply -- but I have not found any setting on the PT100 that would state LARGE/SMALL speakers.. Anybody? Thanks! |
|
|
|
Post by stads77 on Feb 8, 2019 23:39:22 GMT -5
The PT-100 always runs full range, no bass management in it, but added outputs for subs with built in crossovers.
|
|
|
|
Post by evergreek on Feb 9, 2019 14:09:29 GMT -5
The PT-100 always runs full range, no bass management in it, but added outputs for subs with built in crossovers. Stads77.. so should I connect the lfe to the sub outs? Would I be getting “double bass” doing that? |
|
|
|
Post by stads77 on Feb 9, 2019 14:43:34 GMT -5
I’m not sure how the Tritons work, the signal will be full range, so it will only work if the Tritons have a low pass filter of some sort ( something g that cuts the signal to the appropriate range).
|
|
|
|
Post by liv2teach on Feb 9, 2019 15:51:05 GMT -5
|
|
|
|
Post by josh6113 on Feb 9, 2019 16:43:35 GMT -5
I use a pt-100 on my definitive 9060 towers and the mains are full range. Leave the Tritons hooked up with speaker wire only and leave LFE unhooked. Just hook up rca from amp into pt-100 mains.
|
|
|
|
Post by evergreek on Feb 9, 2019 22:41:41 GMT -5
Thanks guys! Appreciate it!
|
|
