|
|
Post by eric84405 on Jul 19, 2019 22:37:45 GMT -5
This processor has served me well but today I turned it on and the displays shows "Loading" then "Sherbourn" and then it goes completely blank. All other functionality appears to be normal, just no display. Anyone else experience this? Thanks.
|
|
|
|
Post by creimes on Jul 20, 2019 0:05:53 GMT -5
Did you hit the dim button by chance ??
The display goes from lowest brightness(1) to highest brightness(10) and then off so if the dim button got pushed once it may just be set to off now, i tested my 7020A and when screen is set to off and you power the 7020 on it will say loading and then Sherbourn and then goes off, I'm betting it will work if you press the Dim button after you power it back on.
Chad
|
|
|
|
Post by annjones13 on Jul 20, 2019 8:52:36 GMT -5
Did you hit the dim button by chance ?? The display goes from lowest brightness(1) to highest brightness(10) and then off so if the dim button got pushed once it may just be set to off now, i tested my 7020A and when screen is set to off and you power the 7020 on it will say loading and then Sherbourn and then goes off, I'm betting it will work if you press the Dim button after you power it back on. Chad This happened to me. I thought it was going to need service. With no screen, I could not tell what it was doing.... Random button pushing, and a couple resets, and it fixed itself. I think it was operator error Ann |
|
|
|
Post by eric84405 on Jul 20, 2019 14:50:23 GMT -5
You guys are on it. Thanks! I've never done that before with the dim button. Ann's got a point. With no screen, it is difficult to know what's going on. Thanks again!
Eric
|
|
