|
|
Post by gus4emo on Jan 6, 2020 19:45:51 GMT -5
Denon 4520, a few months ago it stops, checked cables, checked the receiving unit, all good...gave up, a few days later, started working, this time checked all I checked before and unplugged the receiver a couple of times, still nothing, switched zone 2 and 3, zone 2 working, I still see zone 3 is on and it displays the content, but no sound, is this a board gone bad?
|
|
|
|
Post by gus4emo on Jan 6, 2020 20:47:37 GMT -5
Anyone???!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2020 13:05:35 GMT -5
I have the same intermittent issue with an Integra zone 2.
Use the unit one day fine, next day go to partio, use android app to turn on and nothing- everything shows correct & turned on.
I unplug, plug in, turn on main power & speakers, then turn on zone 2. Sometimes have to change zone 2 "source" back and forth.
gus4emo, only thing I know to try is factory reset. Oh joy, get to set-up everything again.
|
|
|
|
Post by gus4emo on Jan 7, 2020 16:00:19 GMT -5
I have the same intermittent issue with an Integra zone 2. Use the unit one day fine, next day go to partio, use android app to turn on and nothing- everything shows correct & turned on. I unplug, plug in, turn on main power & speakers, then turn on zone 2. Sometimes have to change zone 2 "source" back and forth. gus4emo, only thing I know to try is factory reset. Oh joy, get to set-up everything again. Found the culprit, about 4 months ago, I changed the settings on the receiver from all preout to custom, to have the receiver power the wides, changed it to all preouts then back to custom, zone 3 is back, will keep a close eye on the receiver...last year, without me noticing it, the receiver changed the front channels to large, blew 2 woofers on the SM55, nothing has happened since changing the fronts back to small....speakers were on warranty from Crutchfield, all is good, will add the A300 to power the wides and change the settings to all preouts... |
|
