|
|
Post by LuisV on Mar 14, 2010 13:08:58 GMT -5
That's a new piece of gear... the Chuckie Mat....  |
|
|
|
Post by LuisV on Mar 14, 2010 13:14:29 GMT -5
Once I get everything together, I may just do that. Would probably have been MUCH easier and probably cheaper to buy some already made. Unfortunately, my mind conjures up ideas and I get going....lol. I should have the rough wood template done next week for the bass traps. They are actually going to be at the top four corners of my room and be roughly 4 feet long. Thanks for the compliments Luis  Rich .....and before anyone says it, damn, my ceiling fan is dusty.  Awesome idea! If I can make one suggestion, wouldn't the top panel on the top left look more uniform if fully extended to match the one below it? |
|
|
|
Post by DoingOK on Mar 14, 2010 13:20:30 GMT -5
Awesome idea! If I can make one suggestion, wouldn't the top panel on the top left look more uniform if fully extended to match the one below it? My drawing isn't really to scale, but I understand what you mean by the drawing. The lower panels will most likely be turned 90 degrees to fit the design better. I have exactly 6" spacing between the panels for uniformity so far. Plus, the upper corners will have bass traps so I have to still figure out how everything ties together. Good eye though. That's why I've spent a lot of time laying out different patterns on the garage floor. Should look something closer to this (excuse the caveman-like MSPaint skillz):  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 14, 2010 16:07:49 GMT -5
I just noticed my wise guy detection meter pegging in posts #519 and #520. ;D  |
|
|
|
Post by DoingOK on Mar 14, 2010 17:51:29 GMT -5
I just noticed my wise guy detection meter pegging in posts #519 and #520. ;D Should be pegged high son. |
|
Animo
Emo VIPs 
Gotta Love Me!!
Posts: 2,662
|
Post by Animo on Mar 14, 2010 18:08:29 GMT -5
So this little amplifier came in just to tease me....  My turn to give you a little amp envy...LOL. Here's a pair of LT1300s being modified by eD. I have one of these puppies on the back of my Dual 13Av.2.  |
|
|
|
Post by DoingOK on Mar 14, 2010 18:14:00 GMT -5
hence my wording of "little amplifier".....lol.
|
|
NorthStar
Seeker Of Truth
"And it stoned me to my soul" - Van Morrison
Posts: 0
|
Post by NorthStar on Mar 15, 2010 2:05:27 GMT -5
Man! I luv this thread! Some people here have great taste and are very honest with their better half.
Also, some people really love their bass, plus others are quite clean with their garages.
Sorry I cannot participate as I don't fit any of these profiles (dogs in a cage guarding the sub, so it won't take off... ;D ).
Man! I tought I was smart and knew everything there is to know!!!
|
|
|
|
Post by Mike Ronesia on Mar 15, 2010 6:48:16 GMT -5
Man, you guys are buying lots of cool stuff. My last purchase was lunch and I don't think you want to see a picture of how that's looking now. I did just pay for a UMC-1 last week but it has not shipped yet. |
|
|
|
Post by LuisV on Mar 15, 2010 13:59:06 GMT -5
I just noticed my wise guy detection meter pegging in posts #519 and #520. ;D LMAO.... ;D Who me? |
|
|
|
Post by LuisV on Mar 15, 2010 14:01:09 GMT -5
My drawing isn't really to scale, but I understand what you mean by the drawing. The lower panels will most likely be turned 90 degrees to fit the design better. I have exactly 6" spacing between the panels for uniformity so far. Plus, the upper corners will have bass traps so I have to still figure out how everything ties together. Good eye though. That's why I've spent a lot of time laying out different patterns on the garage floor. Gotcha and I think it's going to look great! Again, can't wait to see them.... |
|
|
|
Post by DoingOK on Mar 15, 2010 14:01:31 GMT -5
I think Chuckie has been hitting the bottle again.  |
|
|
|
Post by LuisV on Mar 15, 2010 14:02:24 GMT -5
No comment... |
|
NorthStar
Seeker Of Truth
"And it stoned me to my soul" - Van Morrison
Posts: 0
|
Post by NorthStar on Mar 15, 2010 19:37:04 GMT -5
I think Chuckie has been hitting the bottle again. Was that his last purchase? |
|
|
|
Post by ny1pr2009 on Mar 15, 2010 19:44:25 GMT -5
My Latest Purchase, Emotiva XPA-1 Monoblocks and a pair of Dalis Helicon 800 MK1 Full Range Speakers  |
|
NorthStar
Seeker Of Truth
"And it stoned me to my soul" - Van Morrison
Posts: 0
|
Post by NorthStar on Mar 15, 2010 19:59:53 GMT -5
^ WoW! That looks real cool!  Congratulations! |
|
|
|
Post by db029936 on Mar 16, 2010 1:05:52 GMT -5
Nice transmission raffin.
|
|
Jimna
Minor Hero
Support Live Music
Posts: 92
|
Post by Jimna on Mar 19, 2010 1:40:46 GMT -5
the amp to the right of the monoblocks needs the black trim too. i really like the black trim.
such a nice system though, congrats on the many hrs of listening.
|
|
Pauly
Emo VIPs
Posts: 5,237
|
Post by Pauly on Mar 19, 2010 2:41:30 GMT -5
ny, how many damn speakers do you go through per year lol? It seems like I've seen at least 3 or 4 different sets in your room in the past year. It must be fun though huh?
|
|
|
|
Post by DoingOK on Mar 19, 2010 11:47:10 GMT -5
I'm just giddy with excitement................ordered the wood end plates from Kazoo for my audio gear and I found a site to make a nice wood knob for my headphone amplifier. I've sent some parts off my headphone amplifier to Kazoo to replicate in wood also. Should look very nice when completed.   |
|
Congratulations! 
