|
|
Post by ElectricKoolAid on Jul 1, 2022 12:18:46 GMT -5
Hi All
I was just trying to upgrade to 2.5 as I have not updated in about 1yr. My receiver is only about 1yr old but I cannot stand when I pause a video or movie and then wait maybe 3-5min and try to resume I get no audio.. I need to go into the AV closet, hard power down the processor and wait for it and all amps to come back in order to get audio..
Someone know if 2.5 or 3.0 fix this? I Tried to update to 2.5 but used 3 different FAT32 USB sticks only to be shown " no usb stick" on my unit?
Unfortunately v2.5 does not fix this. I have not heard if 3.0 will fix this so maybe someone from Emo can chime in on that. |
|
Lonnie
Emo Staff 
admin
Pay no attention to the man behind the curtain
Posts: 6,999
|
Post by Lonnie on Jul 1, 2022 13:59:45 GMT -5
Hi All I was just trying to upgrade to 2.5 as I have not updated in about 1yr. My receiver is only about 1yr old but I cannot stand when I pause a video or movie and then wait maybe 3-5min and try to resume I get no audio.. I need to go into the AV closet, hard power down the processor and wait for it and all amps to come back in order to get audio.. Someone know if 2.5 or 3.0 fix this? I Tried to update to 2.5 but used 3 different FAT32 USB sticks only to be shown " no usb stick" on my unit?
3.0 does indeed correct this. Lonnie |
|
|
|
Post by DellaDog on Jul 1, 2022 15:05:29 GMT -5
So post 3.0.
Call it beta if you must, but I’m sure most of us would prefer the improved ARC, corrected snap, crackle pops, and frozen reboots over the production 2.5.
|
|
KeithL
Administrator
Posts: 10,234
|
Post by KeithL on Jul 1, 2022 16:09:37 GMT -5
Yes... v3.0 will fix the no-audio issue... and that other stuff. It will NOT, as far as we know, affect which USB sticks will work. And we WILL be making it available very shortly. So post 3.0. Call it beta if you must, but I’m sure most of us would prefer the improved ARC, corrected snap, crackle pops, and frozen reboots over the production 2.5. |
|
|
|
Post by jasonf on Jul 1, 2022 18:10:31 GMT -5
I've been getting a lot more of the "compressed digital sound" issue lately that requires a reboot, so I'm going to throw that one into my hope-that's-fixed-in-3.0 list :-)
Looking forward to release!
|
|
|
|
Post by AudioHTIT on Jul 1, 2022 20:51:33 GMT -5
I've been getting a lot more of the "compressed digital sound" issue lately that requires a reboot, so I'm going to throw that one into my hope-that's-fixed-in-3.0 list :-) Looking forward to release! I hope that’s on the list as well, it’s been reported by many, though I don’t get it too often (I refer to it as ‘digital hair’). But have you tried changing audio modes to fix it? Like to stereo and back to auto, that will typically fix it for me, without a reboot. |
|
killa
Seeker Of Truth
Posts: 4
|
Post by killa on Jul 1, 2022 21:38:58 GMT -5
Is there “Trigger in” functionality in the XMC-2 , couldn’t see it in the manual.
Use case would be using a streamer (eg: Bluesound Node 2i with a Trigger out) to turn on XMC-2 so family members could easily use Spotify connect without having to turn on Amp etc.
Any other options for this?
|
|
|
|
Post by jim80z on Jul 1, 2022 22:00:23 GMT -5
I have an important question regarding ticks/pops/clicks for anyone who has had their processor from around firmware 2.0 days. Was there a specific firmware version where this tick/pop/click behavior first started? As in, I was on one version with none of this noise, then I updated to this new version, and the noise was present? Still trying on my end to put together as much info on this issue as I can, and I have some information on this question already, but I would love to hear from a few more folks to confirm this. I'll mine this post for info as well. Thanks again. Yeah I have been thinking about this. The only time I don't remember the pops being there was prior to me implementing DIRAC. BTW I added the 100ms and the pops are still there, mainly on Nvidia/Apple TV as the format of audio changes eg playing a movie in multichannel moving between apps/icons the beep is in a different format (or visa versa etc). |
|
|
|
Post by AudioHTIT on Jul 1, 2022 22:59:09 GMT -5
Is there “Trigger in” functionality in the XMC-2 , couldn’t see it in the manual. Use case would be using a streamer (eg: Bluesound Node 2i with a Trigger out) to turn on XMC-2 so family members could easily use Spotify connect without having to turn on Amp etc. Any other options for this? Not a trigger per se, the IR Input can be wired and accept an ‘on’ command from an IR Repeater like a Harmony Hub, and CEC might work, but I think most would solve that problem with a universal remote. |
|
|
|
Post by zdoggz on Jul 2, 2022 6:25:47 GMT -5
I have an important question regarding ticks/pops/clicks for anyone who has had their processor from around firmware 2.0 days. Was there a specific firmware version where this tick/pop/click behavior first started? As in, I was on one version with none of this noise, then I updated to this new version, and the noise was present? Still trying on my end to put together as much info on this issue as I can, and I have some information on this question already, but I would love to hear from a few more folks to confirm this. I'll mine this post for info as well. Thanks again. Yeah I have been thinking about this. The only time I don't remember the pops being there was prior to me implementing DIRAC. BTW I added the 100ms and the pops are still there, mainly on Nvidia/Apple TV as the format of audio changes eg playing a movie in multichannel moving between apps/icons the beep is in a different format (or visa versa etc). I had pops prior to implementing Dirac. I know this because I had my rmc1 for quite awhile before using Dirac. I don’t get them often, but I noticed it often happens when I first turn on the rmc as soon as the speaker channels activate. I haven’t really troubleshooted it though to see if it’s only when the appletv is on or not since it hasnt been frequent enough for me to bother. |
|
|
|
Post by fazedout on Jul 2, 2022 10:03:25 GMT -5
Is there “Trigger in” functionality in the XMC-2 , couldn’t see it in the manual. Use case would be using a streamer (eg: Bluesound Node 2i with a Trigger out) to turn on XMC-2 so family members could easily use Spotify connect without having to turn on Amp etc. Any other options for this? have a look at Switch-Bot Hub Mini = might be overkill, but once it’s learnt different IR devices, you can create Scenes, using parts of one along with others. eg Turn on XMC Set XMC input to xxx Play Blusound App Shuffle Blu etc Even able to set AC temps |
|
xeno
Minor Hero
Posts: 50
|
Post by xeno on Jul 2, 2022 13:35:37 GMT -5
I have an important question regarding ticks/pops/clicks for anyone who has had their processor from around firmware 2.0 days. Was there a specific firmware version where this tick/pop/click behavior first started? As in, I was on one version with none of this noise, then I updated to this new version, and the noise was present? Still trying on my end to put together as much info on this issue as I can, and I have some information on this question already, but I would love to hear from a few more folks to confirm this. I'll mine this post for info as well. Thanks again.
I had snaps when changing inputs or going from streaming service to another. Updated to 2.5 and still have snaps, even after changing the delay to 100ms.
They're not loud, but as the wife pointed out, "that doesn't sound right."
|
|
|
|
Post by Topend on Jul 2, 2022 13:42:51 GMT -5
Is the imminent release of FW3.0 an indicator that the HDMI 2.1 board is going to be available to buy soon?
|
|
Ricco
Minor Hero
Posts: 12
|
Post by Ricco on Jul 2, 2022 14:00:04 GMT -5
I have an important question regarding ticks/pops/clicks for anyone who has had their processor from around firmware 2.0 days. Was there a specific firmware version where this tick/pop/click behavior first started? As in, I was on one version with none of this noise, then I updated to this new version, and the noise was present? Still trying on my end to put together as much info on this issue as I can, and I have some information on this question already, but I would love to hear from a few more folks to confirm this. I'll mine this post for info as well. Thanks again.
I had snaps when changing inputs or going from streaming service to another. Updated to 2.5 and still have snaps, even after changing the delay to 100ms.
They're not loud, but as the wife pointed out, "that doesn't sound right."
Have the same problem. I think it's a memory leak of some sort causing the pops. Regularly do a hard reboot eliminates the issue for me. |
|
Lsc
Emo VIPs 
Posts: 3,426
|
Post by Lsc on Jul 2, 2022 14:34:16 GMT -5
Has anyone needed to send their unit in for an HDMI ARC issue? I’m not sure if the problem is my TV (LG 65 C7) or XMC2.
|
|
|
|
Post by Thunderduck on Jul 2, 2022 14:45:02 GMT -5
Things have been going good with firmware 2.5 for some time now until this afternoon when I turned the tv on and got no audio with my RMC in Video Remains On mode. Normally I do a Lowest Power reboot and everything is ok. For some dumb reason I decided to reload 2.5. The firmware has been "Unpacking" for 30 minutes now. That does not sound correct.
Can I turn off the RMC at this point and not kill it or should I just leave it alone and see what happens. I should have known better.
Thanks much.
EDIT: Powered down and waited 10 minutes. Turned power back on and then rebooted the unit. All came back ok. Will not do that again any time soon.
|
|
|
|
Post by lampshade29 on Jul 2, 2022 17:39:56 GMT -5
Long time reader, first time poster lol. I get pops and clicks for anything that mainly involves my Sony OLED XR-77A80J. I’m sending all my audio from the tv to a XMC—2 via toslink (it always works, I hate playing the stupid HDMI ARC game), I’m on Firmware 2.5, and my other source is a Shield via HDMI.
When I start the XMC-2, I get one pop from my left speaker, then when I use the built in tv tuner and change local channels I get a pop /garbled sound every time I change the channel.
Then also using the built in Apps in from the Sony XR-77A80J I get pop always, I feel it’s toslink decoding issue since all the audio from the tv to the XMC-2 is via toslink. I tried the lip sync fix that Brent suggested with no luck at all for my issue. I know he said it’s a possible HDMI fix and I was hoping for toslink too but no luck.
I’m keeping my fingers crossed the new HDMI board resolves ARC handshakes issues, and resolves all these pops and clicks.
Just my two cents hopes this helps.
|
|
|
|
Post by geebo on Jul 2, 2022 18:04:01 GMT -5
Has anyone needed to send their unit in for an HDMI ARC issue? I’m not sure if the problem is my TV (LG 65 C7) or XMC2. I heard that firmware 3.0 is supposed to help ARC functionality so you may want to wait for it's release. It never hurts to call Emotiva but you'll have to wait till Tuesday. |
|
xeno
Minor Hero
Posts: 50
|
Post by xeno on Jul 2, 2022 20:45:11 GMT -5
I had snaps when changing inputs or going from streaming service to another. Updated to 2.5 and still have snaps, even after changing the delay to 100ms.
They're not loud, but as the wife pointed out, "that doesn't sound right."
Have the same problem. I think it's a memory leak of some sort causing the pops. Regularly do a hard reboot eliminates the issue for me. Good to know. Haven't done a hard reboot for awhile.
3.0
Looking forward to (hopefully) being able to boot into low power mode without immediately locking up.
|
|
|
|
Post by jasonf on Jul 2, 2022 21:08:57 GMT -5
Has anyone needed to send their unit in for an HDMI ARC issue? I’m not sure if the problem is my TV (LG 65 C7) or XMC2. What kind of ARC issue? ARC is spotty on any firmware released so far, so I don't think it's something you can send in your processor for. I think most of us deal with this by turning off any ARC features we have problems with. That's been a big ask of mine for a while. I just want volume control and input switching to work as reliably as it did on my Marantz. |
|
