|
|
Post by elmex on Jun 1, 2020 20:17:42 GMT -5
Hello,
I just put in for an upgrade for the RMC-1. Can someone help me out with a picture of the accessories.ie FM AM antenna? I have accumulated a lot of wires and antennas throughout the years but I need to find the right one. Thanks in advance.
|
|
|
|
Post by novisnick on Jun 1, 2020 20:32:45 GMT -5
Here you go.  |
|
|
|
Post by elmex on Jun 2, 2020 7:18:33 GMT -5
Excellent!!! Thank you very much. Now it’s happy hunting.
|
|
|
|
Post by novisnick on Jun 3, 2020 0:13:33 GMT -5
Excellent!!! Thank you very much. Now it’s happy hunting. Good luck! 👍🙏🎶 |
|
|
|
Post by elmex on Jun 5, 2020 6:07:10 GMT -5
Hi,
Just noticed that I need to find the other antenna. Do you have a picture of that one? The picture of the black one helped because I had 3 to choose from. Thanks.
|
|
|
|
Post by novisnick on Jun 5, 2020 7:20:35 GMT -5
Zoom in if you can, it’s in the bag. Black connector and pinkish antenna. They screw together.
|
|
|
|
Post by ÈlTwo on Jun 5, 2020 8:11:38 GMT -5
It's just a semitransparent flat wire with two copper leads in it. The whole thing forms a Tee, with white plastic at the intersection of the Tee and at the ends of the top of the Tee
|
|
|
|
Post by monkumonku on Jun 6, 2020 12:32:49 GMT -5
Here you go. Questions- What is that object in the upper right corner of the larger bag? And what are those objects in the smaller bag? |
|
|
|
Post by novisnick on Jun 6, 2020 12:43:11 GMT -5
Here you go. Questions- What is that object in the upper right corner of the larger bag? And what are those objects in the smaller bag? From the manual (Left corner)it appears to ba the AM antenna stand. (Right corner) trigger cable.  |
|
|
|
Post by monkumonku on Jun 6, 2020 14:38:54 GMT -5
Questions- What is that object in the upper right corner of the larger bag? And what are those objects in the smaller bag? From the manual (Left corner)it appears to ba the AM antenna stand. (Right corner) trigger cable. Thanks! But I was wondering what is in the smaller plastic bag that is under the AM antenna and above the mic stand? The trigger cable, FM antenna and AM antenna stand appear to be in that bag on the left side. [edit] Oops, never mind. I see that's the mic holder in the smaller bag. Thanks! |
|
|
|
Post by tngiloy on Jun 8, 2020 6:20:09 GMT -5
FWIW, Here is the letter I received from Emotiva with my XMC-1 > RMC-1 trade in order. #3 talks about additional charges for the mic and mic cable. I doubt they will charge for the am/fm antennas or trigger cable. My XMC-1 should reach their factory tomorrow and should be checked shortly after. I found everything but the trigger cable (may have sent with an amp I sold years ago) but I doubt they will charge for it. Pretty sure they are mostly concerned about the remote, mic and mic cable.
Thank you for your
XMC-1 TRADE-IN ORDER!
Hi Thomas,
We’re here to share the instructions on how you get your XMC-1 unit back to us so that we can get your brand new RMC-1L out to your home! If you haven’t already, please be sure to read the rules about the trade-in on the product page here. This is also a friendly reminder that all sales are final!
"Here’s what you need to do:
1. Look out for the shipping label hitting your inbox soon.
2. You’ll be mailing your XMC-1 back to us in either the original box and insert packaging or an official Emotiva replacement box set! To ensure safe transport, we’re only accepting our packaging that was designed specifically for the product. Part of this fantastic trade-in deal is that we rehome the XMC-1s that come back to us, and we need them sent back safely. We are not responsible for any damaged units that do not get shipped to us in approved original packaging! If you need to buy a replacement box, please respond to this email or call us at 615-790-6754.
3. Pack up your unit, including all of the accessories. We’ll charge $50 for the microphone, and $25 for the digitizer cable if you are missing those items.
4. Remove all labels and stickers from your existing box and affix the shipping label we mailed to you.
5. Drop off your unit at your closest UPS Store.
6. To help streamline the process, if you did not purchase your XMC-1 from us directly, or you are not the registered owner, please get in touch. You can email your receipt from an authorized retailer, or complete the necessary steps to transfer the warranty to you, which can be found here."
|
|
|
|
Post by monkumonku on Jun 8, 2020 13:07:58 GMT -5
FWIW, Here is the letter I received from Emotiva with my XMC-1 > RMC-1 trade in order. #3 talks about additional charges for the mic and mic cable. I doubt they will charge for the am/fm antennas or trigger cable. My XMC-1 should reach their factory tomorrow and should be checked shortly after. I found everything but the trigger cable (may have sent with an amp I sold years ago) but I doubt they will charge for it. Pretty sure they are mostly concerned about the remote, mic and mic cable. Thank you for your XMC-1 TRADE-IN ORDER! Hi Thomas, We’re here to share the instructions on how you get your XMC-1 unit back to us so that we can get your brand new RMC-1L out to your home! If you haven’t already, please be sure to read the rules about the trade-in on the product page here. This is also a friendly reminder that all sales are final! "Here’s what you need to do: 1. Look out for the shipping label hitting your inbox soon. 2. You’ll be mailing your XMC-1 back to us in either the original box and insert packaging or an official Emotiva replacement box set! To ensure safe transport, we’re only accepting our packaging that was designed specifically for the product. Part of this fantastic trade-in deal is that we rehome the XMC-1s that come back to us, and we need them sent back safely. We are not responsible for any damaged units that do not get shipped to us in approved original packaging! If you need to buy a replacement box, please respond to this email or call us at 615-790-6754. 3. Pack up your unit, including all of the accessories. We’ll charge $50 for the microphone, and $25 for the digitizer cable if you are missing those items. 4. Remove all labels and stickers from your existing box and affix the shipping label we mailed to you. 5. Drop off your unit at your closest UPS Store. 6. To help streamline the process, if you did not purchase your XMC-1 from us directly, or you are not the registered owner, please get in touch. You can email your receipt from an authorized retailer, or complete the necessary steps to transfer the warranty to you, which can be found here." Thanks for the info. I am missing the AM and FM antennae, which must cost less than $1.00. Oh, I used the FM antenna to make a custom DIY power cord. |
|
|
|
Post by tngiloy on Jun 8, 2020 16:56:37 GMT -5
I'll let you know if they charge me for the missing trigger cable in my box. If the Emotiva warehouse is anything like my a/v closet, I would bet they have more cables/antennas than Carter has little liver pills.
BTW, if anyone here needs any s-video cables please let me know.
|
|
|
|
Post by elmex on Jun 9, 2020 11:40:59 GMT -5
Thanks all for the help. After reading a post that FedEx ate my Oppo I decided to make the pilgrimage today. I had issues getting the shipping labels for the XMC and another XPA upgrade. Well I drove 4 hours and dropped off my gear in person- I don’t recommend that to anyone because they are closed and most folks are working virtual. Now I’m eating some BBQ and Puckett’s before I head home. The scuttlebutt is that Emo is going to release some in ceiling speakers sometime soon. Thanks again.
|
|
