|
Post by ttocs on Jul 23, 2020 12:23:27 GMT -5
Here's a fun way to justify buying cool tools! You can use a Laser Level as a helper to a cell phone app to quickly and accurately determine the angle that a speaker location is at relative to the Main Listening Position. It's really simple. Make sure the AutoLevel feature is locked. Place the laser level in the center of the MLP and aim it at the center of your front wall, tv, space between the Left/Right speakers, whatever. Then plop your cellphone with a Compass app open on the laser. This will invariably not be at an orientation which will provide a number that allows for easy math. So change it. Rotate the phone so the number is what you want it to be as a starting point. Now rotate the laser/phone so that the laser points where you want the speaker to be located. In this case, it's going to be the angle I want to use for Front Width speakers, so I'm choosing 50°. Now move the speaker into the position relative to the laser line. Of course the photos are just examples, I don't have a countertop where I sit. This same principle can be used for finding vertical angles, albeit with a little more difficulty. The app to use for this would be the Measure app and then choose Level. Also, you'll probably need to use some tape so the phone is a little more securely fixed with the laser.
|
|
|
Post by AudioHTIT on Jul 23, 2020 15:39:15 GMT -5
More clever stuff with a laser and an iPhone, I need to try this, so you could also use it to measure your existing speaker locations?
|
|
|
Post by Boomzilla on Jul 23, 2020 15:46:18 GMT -5
I prefer the "Taser" method. Get the speakers about where they need to be, briefly tase the mover, and then see how they sound, wherever they end up! Just kidding - But I DO have an audio amigo who measures speaker placement to this degree (including a digital inclinometer and a metal jig).
|
|
|
Post by ttocs on Jul 23, 2020 15:48:09 GMT -5
LOL! Taser Method! Love it! Fun stuff.
|
|
|
Post by ttocs on Jul 23, 2020 15:51:14 GMT -5
More clever stuff with a laser and an iPhone, I need to try this, so you could also use it to measure your existing speaker locations? Yep, that's easy to do. Doing the vertical angles is more clumsy, but since I've only got two pair of overheads it's really just two measurements because you don't point at the speakers, you point straight forward and reverse for the angles, just like the profile view from Dolby.
|
|
|
Post by 405x5 on Jul 23, 2020 16:22:37 GMT -5
My speaker locations haven’t moved in 20 years....I’ll need to figure out another use for the laser!
Bill
|
|
|
Post by ttocs on Jul 23, 2020 16:34:05 GMT -5
My speaker locations haven’t moved in 20 years....I’ll need to figure out another use for the laser! Bill Are you certain the speakers haven't moved? They might need a nudge which will require, at the very least, some Straightening Gloves! or some other normally useless item.
|
|
|
Post by 405x5 on Jul 23, 2020 16:56:08 GMT -5
My speaker locations haven’t moved in 20 years....I’ll need to figure out another use for the laser! Bill Are you certain the speakers haven't moved? They might need a nudge which will require, at the very least, some Straightening Gloves! or some other normally useless item. Yeah I’m sure, unless I whip out my copy of Poltergeist. Next morning they’re in the middle of the room.
|
|
|
Post by Talley on Jul 23, 2020 18:39:59 GMT -5
I use a speed square and a bosch laser level and mark on the back wall my spread for toe in. Seems to work good so far. Just picked up a digital angle finder so plan on making sure speakers are perfectly plumb with themselves
Speed Square Laser Bosch Measure Laser Bosch Level Digital Angle Finder
The bosh laser measure has a 1/4" tripod mount so I use a boom stand with a 1/4" thread and have the laser measuring device mounted where my head will go. I don't tighten it on purpose which allows it to swivel around. Then I aim it at the tweeter. I get these to within .001" of eachother and is very difficult to do so. I believe it helps though.
|
|
|
Post by ttocs on Jul 23, 2020 18:57:00 GMT -5
Nuthin' beats a speed square! Besides a hammer and a tape measurer, I can't think of another tool that's as popular in the house building trades.
|
|