Post by audiobill on Jul 29, 2020 5:23:42 GMT -5
For anyone using DSP for room correction, target curves are (or should be) an important topic.
Forgive me if there's already a thread somewhere, but I thought it would be interesting to share what we're using.
Aware that HT systems may use different curves, let's keep this to two channel only.
I used REW to measure my in-room response and generate filters, which were then loaded into Roon as convolution filters.
Currently, I'm using a 2.5db/octave lift from 200 to 20 HZ, flat from 200 to 1 K, and falling from 1K to 20K at 1db/octave.
Forgive me if there's already a thread somewhere, but I thought it would be interesting to share what we're using.
Aware that HT systems may use different curves, let's keep this to two channel only.
I used REW to measure my in-room response and generate filters, which were then loaded into Roon as convolution filters.
Currently, I'm using a 2.5db/octave lift from 200 to 20 HZ, flat from 200 to 1 K, and falling from 1K to 20K at 1db/octave.
