|
|
Post by creimes on Aug 4, 2020 2:04:27 GMT -5
The C1 and C2 will both be a sonic match to the T0  Chad |
|
|
|
Post by randomquickness on Aug 4, 2020 7:13:29 GMT -5
the c1 works well with them but either way you should be happy  |
|
|
|
Post by pallpoul on Aug 4, 2020 8:26:05 GMT -5
The C2 may overwhelm your T zero's. if the room is medium size, and u r not to far from tv, get C-1.
|
|
|
|
Post by garbulky on Aug 4, 2020 9:50:24 GMT -5
I think you'll be fine. If the c2 is louder in comparison to the tzero then you simply reduce the gain on your xmc-2 for that channel. The c2 is larger and therefore should provide you a better center imo but both will sound good.
|
|
|
|
Post by creimes on Aug 4, 2020 9:58:31 GMT -5
What about the fact that all my other speakers are 8 ohm will that be a problem. I'm pretty new to all this ohm stuff. That will not be an issue. Chad |
|
|
|
Post by garbulky on Aug 4, 2020 10:32:28 GMT -5
Not a problem. Your power amp can handle both 4 ohm and 8 ohm. Remember speakers vary their impedance continously throughout their frequency response even if they are rated at 8 or 4 ohms. So amplifiers are designed to handle this change.
|
|
|
|
Post by randomquickness on Aug 12, 2020 12:48:15 GMT -5
they sure can
|
|
