|
|
Post by alhull on Mar 1, 2021 14:24:30 GMT -5
My friend has an XMC-1 running v4.something firmware. He's never updated it until trying now.
When going into the Menu under Setup, there is no ADVANCED option listed. So he can't do anything FW related. Hard power resets make no difference.
How can he get to ADVANCED settings?
|
|
|
|
Post by doc1963 on Mar 1, 2021 15:03:36 GMT -5
My friend has an XMC-1 running v4.something firmware. He's never updated it until trying now. When going into the Menu under Setup, there is no ADVANCED option listed. So he can't do anything FW related. Hard power resets make no difference. How can he get to ADVANCED settings? It sounds like your friend, at some point, has locked himself out of the "Advanced" settings menu. From the Users Manual... Setup LockSetup Lock is used to prevent the XMC-1’s configuration settings from being inadvertently changed. - Selecting None will leave all configuration settings unlocked. This is the normal default configuration. - Selecting Advanced locks the Setup Advanced Menu - which will then no longer appear on the Setup Menu. This prevents anyone from inadvertently changing any settings on the Setup Advanced Menu, which include resetting the XMC-1 to factory defaults.- Selecting All locks the entire Setup Menu. Note: If you lock the entire Setup Menu - by selecting All, or just the Setup Advanced Menu - by selecting Advanced, you will no longer have access to the Setup Advanced Menu, which will prevent you from changing the lock settings. This will prevent you from unlocking the menus.If you find yourself in this situation, you may still access the Setup Advanced Menu directly by pressing the Menu button on the front panel WHILE HOLDING DOWN THE FRONT PANEL ENTER BUTTON.Hope this helps...  |
|
|
|
Post by alhull on Mar 1, 2021 15:11:07 GMT -5
Thanks. I've passed this info to him. Hopefully he'll be all set now.
|
|
