emotiva VSUB1

[desert93xj]

I have a Emotiva TA100 amp/receiver and I have Kef Q350 speakers. I have a sound dynamics ths2000 subwoofer. I was wondering if the wireless Vsub 1 would work with the TA100 and the subwoofer that I have and if so how easy and how does it hook up. 

[ttocs]

I have a few of these and they work well.

It's just like using a wire, except that you need two wires. One wire comes from an RCA output into the transmitter, the receiver connects to a wire that then connects to the subwoofer RCA input. It's really that simple.

The transmitter and receiver need to be paired. It's pretty straightforward.

The only thing to watch for is if there is something that disturbs the wireless signal between the units. If this happens, then they will begin blinking to show loss of connection. Once they are positioned such that any interference has been dealt with they are pretty great.

[desert93xj]

I am looking at the airmotiv S8 for my Ta100 amp/receiver. The room size is 144 sq ft. Would that sub be ample enough to help with base for my Kef Q350 speakers.

[desert93xj]

So I received the VSUb-1 transmitter and received. So If I understand correctly. The proper way to connect the Transmitter to my emotiva TA_100 is 1 wire to the transmitter and the other to the sub connection on the TA100. Do I connect to the white connection or the red one where it says mono or do I use a dual connection that plugs into 1 cable.

[desert93xj]

the subwoofer has a red and white connection at the back, The red connection reads lp filter level input and the white connection xover input