pullo
Seeker Of Truth
Posts: 6
|
Post by pullo on Sept 11, 2022 21:55:49 GMT -5
Good evening to all, hope you all had a great weekend.
I just bough 4 Monitor Audio Apex 10 as my height/atmos speakers. Now I am need of a amplifier to power them.How much power do I need for these to give me good sound quality and which amp will you guys recommend.
Will an Emotiva Basx A500 at 90 watts per channel be sufficient to run these speakers or do I need some thing with more power?
Hope to hear your advice
Fernando
|
|
|
|
Post by AudioHTIT on Sept 11, 2022 22:03:30 GMT -5
Good evening to all, hope you all had a great weekend. I just bough 4 Monitor Audio Apex 10 as my height/atmos speakers. Now I am need of a amplifier to power them.How much power do I need for these to give me good sound quality and which amp will you guys recommend. Will an Emotiva Basx A500 at 90 watts per channel be sufficient to run these speakers or do I need some thing with more power? Hope to hear your advice Fernando The Bas-X seems to be right in the recommended power range for the A-10, and for Atmos it should be plenty. |
|
|
|
Post by vcautokid on Sept 12, 2022 3:21:25 GMT -5
I agree it will be plenty. Atmos channels usually do not demand as much as primary front stage. BAS-X will do great.
|
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,865
|
Post by LCSeminole on Sept 12, 2022 3:24:13 GMT -5
They are 8 ohm so easily driven. For Atmos duty, I doubt they’ll ever need more than 5watts of power ever, so yes an Emotiva A500 will easily drive them and then some.
|
|
pullo
Seeker Of Truth
Posts: 6
|
Post by pullo on Sept 12, 2022 7:38:05 GMT -5
Good morning to all of you who responded to my question. I really appreciate your advice.
Sorry for another question.
So just to cofirm the Emotova Basx A5 is plenty power
to run the Monitor Audio Pex 10 with out any issues and will not be sacrificing any sound quelity with those 90 watts per channel.
I should not spend money on a more powerful amp?
Patiently awaiting you response
Fernanso
|
|
|
|
Post by geebo on Sept 12, 2022 7:50:45 GMT -5
The Bas-X will provide all you need and then some for height speakers. Monitor Audio has this on their site:
"Recommended Amplifier Requirements
25 — 100 W"
The Bas-X falls in comfortably and at the high end of that range.
|
|
|
|
Post by gus4emo on Sept 12, 2022 8:05:51 GMT -5
I'm using 2 A-150s for the wides and heights, don't need anything else.
|
|
pullo
Seeker Of Truth
Posts: 6
|
Post by pullo on Sept 12, 2022 8:34:36 GMT -5
Thank you so much all for your great advice.
Greatly appreciated
|
|
|
|
Post by creimes on Sept 12, 2022 12:49:43 GMT -5
|
|
ttocs
Global Moderator
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,170
Member is Online
|
Post by ttocs on Sept 14, 2022 11:06:10 GMT -5
I'm also one who uses BasX for my Surrounds and ATMOS Tops. Mine is the BasX A-800 which has only 50 Watts @8Ω, and 80 Watts @4Ω, and is more than enough for great ATMOS soundtracks at full volume.
|
|
|
|
Post by davidl81 on Sept 14, 2022 15:37:31 GMT -5
You won’t tell any difference with an amp that cost 5x what the BasX cost for Atmos duty. The Atmos channels draw a very small amount of wattage, any halfway decent amp (the BasX is easily at least this) will sound great.
|
|
