|
|
Post by thompson12 on Dec 23, 2023 10:55:54 GMT -5
I've noticed when increasing the volume the display in the app stops at -10 but the volume will continue to increase.
Mitch
|
|
|
|
Post by jpwoodbu on Dec 23, 2023 11:02:24 GMT -5
I've noticed when increasing the volume the display in the app stops at -10 but the volume will continue to increase. Mitch Ah yes. That bug sounds familiar. I believe it's fixed in the beta version. If you're already using the beta, please let me know. |
|
|
|
Post by thompson12 on Dec 23, 2023 11:08:54 GMT -5
I was using the beta uninstalled and reinstalled not sure what version I have now.
Mitch
|
|
|
|
Post by jpwoodbu on Dec 23, 2023 11:10:22 GMT -5
I was using the beta uninstalled and reinstalled not sure what version I have now. Mitch If you have tuner and zone 2 controls, you're on the beta. |
|
|
|
Post by thompson12 on Dec 23, 2023 11:13:25 GMT -5
I have both. I'll retest when I can and let you know.
Mitch
|
|
|
|
Post by geebo on Dec 23, 2023 11:28:20 GMT -5
I've noticed when increasing the volume the display in the app stops at -10 but the volume will continue to increase. Mitch Ah yes. That bug sounds familiar. I believe it's fixed in the beta version. If you're already using the beta, please let me know. I just checked with the latest beta. Volume does go past -10. I have the max on my RMC set to +1 and that's where it stopped. Would it be possible to have the volume adjustment work by holding the button rather than tapping for each dB of change? |
|
|
|
Post by jpwoodbu on Dec 23, 2023 11:35:01 GMT -5
Ah yes. That bug sounds familiar. I believe it's fixed in the beta version. If you're already using the beta, please let me know. I just checked with the latest beta. Volume does go past -10. I have the max on my RMC set to +1 and that's where it stopped. Would it be possible to have the volume adjustment work by holding the button rather than tapping for each dB of change? Thanks for checking! Regarding holding the button: that should be doable. I'll take a look. |
|
|
|
Post by geebo on Dec 23, 2023 12:31:04 GMT -5
I just checked with the latest beta. Volume does go past -10. I have the max on my RMC set to +1 and that's where it stopped. Would it be possible to have the volume adjustment work by holding the button rather than tapping for each dB of change? Thanks for checking! Regarding holding the button: that should be doable. I'll take a look. I notice that under "Sources" all my visible named HDMI connections show up but my balanced analog input does not. It is marked visible in the RMC. Are only HDMI inputs shown under "Sources"? |
|
|
|
Post by thompson12 on Dec 23, 2023 13:20:34 GMT -5
Ah yes. That bug sounds familiar. I believe it's fixed in the beta version. If you're already using the beta, please let me know. I just checked with the latest beta. Volume does go past -10. I have the max on my RMC set to +1 and that's where it stopped. Would it be possible to have the volume adjustment work by holding the button rather than tapping for each dB of change? Verified it is working in the beta. Mitch |
|
|
|
Post by thompson12 on Dec 23, 2023 13:21:39 GMT -5
Is there a way to add volume control for overhead speakers
Mitch
|
|
|
|
Post by geebo on Dec 23, 2023 13:28:23 GMT -5
Is there a way to add volume control for overhead speakers Mitch They are adjustable for me if they are active. Depends on the listening mode selected. |
|
|
|
Post by jpwoodbu on Dec 23, 2023 13:29:04 GMT -5
Is there a way to add volume control for overhead speakers Mitch Since you're running the beta, if you're in a sound mode that is driving overhead speakers, you should see a height trim adjustment on the inputs page. It sometimes takes quite a long time for the processor to send a notification to the app that the height speakers are active, so you if you don't the height trim, it may be worth going to the info page and clicking the refresh button. I'm thinking of adding a refresh-on-swipe-down on the inputs page for this reason. Or maybe I'll do it for every page. |
|
|
|
Post by thompson12 on Dec 23, 2023 13:30:46 GMT -5
Thanks for checking! Regarding holding the button: that should be doable. I'll take a look. I notice that under "Sources" all my visible named HDMI connections show up but my balanced analog input does not. It is marked visible in the RMC. Are only HDMI inputs shown under "Sources"? I have my phono connected to RCA unbalanced analog and it shows it under source's. Mitch |
|
|
|
Post by jpwoodbu on Dec 23, 2023 13:33:42 GMT -5
Thanks for checking! Regarding holding the button: that should be doable. I'll take a look. I notice that under "Sources" all my visible named HDMI connections show up but my balanced analog input does not. It is marked visible in the RMC. Are only HDMI inputs shown under "Sources"? The intention is that any type of source assigned to an input button (i.e. one of the 7 input buttons on the IR remote) should show up under Sources. On my system, where I've not modified the button assignments, I see "Balanced In" as my last option when I click on Sources. So I imagine that the input both needs to be marked as visible and needs to be assigned to a source button. |
|
|
|
Post by thompson12 on Dec 23, 2023 14:29:16 GMT -5
Is there a way to add volume control for overhead speakers Mitch Since you're running the beta, if you're in a sound mode that is driving overhead speakers, you should see a height trim adjustment on the inputs page. It sometimes takes quite a long time for the processor to send a notification to the app that the height speakers are active, so you if you don't the height trim, it may be worth going to the info page and clicking the refresh button. I'm thinking of adding a refresh-on-swipe-down on the inputs page for this reason. Or maybe I'll do it for every page. Yes height control is there now. Is there away to have separate front and rear height control? Mitch |
|
|
|
Post by jpwoodbu on Dec 23, 2023 14:32:20 GMT -5
Since you're running the beta, if you're in a sound mode that is driving overhead speakers, you should see a height trim adjustment on the inputs page. It sometimes takes quite a long time for the processor to send a notification to the app that the height speakers are active, so you if you don't the height trim, it may be worth going to the info page and clicking the refresh button. I'm thinking of adding a refresh-on-swipe-down on the inputs page for this reason. Or maybe I'll do it for every page. Yes height control is there now. Is there away to have separate front and rear height control? Mitch Unfortunately, the API only provides control for the height speakers as a group. |
|
|
|
Post by geebo on Dec 23, 2023 14:41:51 GMT -5
I notice that under "Sources" all my visible named HDMI connections show up but my balanced analog input does not. It is marked visible in the RMC. Are only HDMI inputs shown under "Sources"? The intention is that any type of source assigned to an input button (i.e. one of the 7 input buttons on the IR remote) should show up under Sources. On my system, where I've not modified the button assignments, I see "Balanced In" as my last option when I click on Sources. So I imagine that the input both needs to be marked as visible and needs to be assigned to a source button. That was it. I assigned Balanced In to a button and it shows up in Sources now. Thanks. |
|
|
|
Post by geebo on Dec 23, 2023 14:44:59 GMT -5
Yes height control is there now. Is there away to have separate front and rear height control? Mitch Unfortunately, the API only provides control for the height speakers as a group. If I might I'd like to suggest putting all volume controls on one page rather than the main volume on the Info page and the groups on the Input page. Maybe all on the Menu page? |
|
|
|
Post by jpwoodbu on Dec 23, 2023 14:52:15 GMT -5
Unfortunately, the API only provides control for the height speakers as a group. If I might I'd like to suggest putting all volume controls on one page rather than the main volume on the Info page and the groups on the Input page. Maybe all on the Menu page? Makes sense. I've gone back and forth on this because it's easy to quickly run out of vertical space and have to start scrolling. The beta version persists the main volume controls on the inputs page. Are you running the beta version? |
|
|
|
Post by geebo on Dec 23, 2023 14:56:47 GMT -5
If I might I'd like to suggest putting all volume controls on one page rather than the main volume on the Info page and the groups on the Input page. Maybe all on the Menu page? Makes sense. I've gone back and forth on this because it's easy to quickly run out of vertical space and have to start scrolling. The beta version persists the main volume controls on the inputs page. Are you running the beta version? I didn't notice that the main volume is on both the Info and Input page. My bad. |
|
