EmoQ not detecting sub and surround issue

[ims]

I ran the update, and load default.

When I run emoq I get the following:

First test runs fine, good distances for all 5 speakers.

Second test tones appear to run fine, but I get:

No subwoofer detect, even though the subwoofer tone is there on the test. The one thing I notice is it appears the tone has a long delay before it runs. So I wonder if the timing for the test has an issue.

It also appears to put the surround left equalization settings into the back right (which doesn't exist).

Crossovers as follows:

Mains - 20hz
Center - 70hz
Surrounds - 250hz
Subwoofer - none

Any ideas?

Thanks,

Greg

[ratmice]

There are multiple reports of similar problems. You are not alone. Please take some time to read the forums, and use the existing threads - multiple threads make it difficult to find pertinent information.

For example:

emotivalounge.proboards.com/index.cgi?board=preamps&action=display&thread=9299

emotivalounge.proboards.com/index.cgi?board=preamps&action=display&thread=9428

emotivalounge.proboards.com/index.cgi?board=preamps&action=display&thread=9351

[ims]

No prob, I can move this to thread #3. It appears to be the most pertinent for the sub issue.

[ratmice]

Feb 14, 2010 12:37:26 GMT -5 ims said:

No prob, I can move this to thread #3. It appears to be the most pertinent for the sub issue.

Hope you didn't take my post the wrong way, but there's way too many threads to keep track of here. Hopefully we'll get an update soon on the reported problems, and get a fix in the works.